FRONT SPEED SENSOR > REMOVAL |
| 1. PRECAUTION |
| 2. REMOVE REAR NO. 2 FLOOR BOARD |
![]() |
Disengage the 2 guides <A> as shown in the illustration.
Disengage the 3 guides <B> and remove the rear No. 2 floor board.
| 3. REMOVE REAR DECK FLOOR BOX |
Remove the rear deck floor box.
| 4. REMOVE REAR NO. 3 FLOOR BOARD |
![]() |
Disengage the 2 guides and remove the rear No. 3 floor board.
| 5. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 6. REMOVE FRONT WHEEL |
| 7. REMOVE FRONT FENDER LINER |
![]() |
Remove the 12 clips, 4 screws, 3 grommets, and front fender liner.
| 8. REMOVE FRONT SPEED SENSOR |
![]() |
Remove the 2 clamps and disconnect the front speed sensor connector.
![]() |
Remove the bolt and No. 2 sensor clamp from the body.
| *1 | No. 2 Sensor Clamp |
![]() |
Remove the bolt, No. 1 sensor clamp and front brake flexible hose together from the shock absorber assembly.
| *1 | No. 1 Sensor Clamp |
| *2 | Front Brake Flexible Hose |
Remove the clamp from the shock absorber.
![]() |
Remove the bolt and front speed sensor.