Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › SKID CONTROL BUZZER (for RHD)

SKID CONTROL BUZZER (for RHD) > INSPECTION

for Preparation Click here



1. INSPECT SKID CONTROL BUZZER ASSEMBLY


    C181788E05
  1. Connect a negative (-) lead from the battery to terminal 1 of the skid control buzzer and a positive (+) lead to terminal 2, and then check that the buzzer sounds.
    Text in Illustration 
    *1
    Component without harness connected
    (Skid Control Buzzer)

    OK:
    The skid control buzzer sounds.

    If the result is not as specified, replace the buzzer.