Home › Vehicle Exterior › WIPER / WASHER › WIPER ECU

WIPER ECU > INSTALLATION

for Preparation Click here



1. INSTALL WINDSHIELD WIPER RELAY ASSEMBLY


    E189327
  1. Install the windshield wiper relay assembly with the bolt.

  1. Connect the connector.



2. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Radio Receiver)


    B227341
  1. Engage the 4 claws to install the center instrument cluster finish panel sub-assembly.



3. INSTALL RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver)


    B223593
  1. Install the radio tuner opening cover with bracket with the 4 bolts <B>.



4. INSTALL RADIO RECEIVER WITH BRACKET (w/ Radio Receiver)
  1. Connect each connector.



    E188510
  1. Engage the 4 claws as shown in the illustration.



    E188506
  1. Install the radio receiver with bracket with the 4 bolts.



5. INSTALL NAVIGATION RECEIVER WITH BRACKET (w/ Navigation System)


    E188508
  1. Engage the 4 claws to temporarily install the navigation receiver assembly with bracket as shown in the illustration.



    E188505
  1. Install the navigation receiver assembly with bracket with the 4 bolts.



6. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    B223459
  1. Connect the connector.

  1. Engage the 3 claws to install the upper instrument panel finish panel sub-assembly.



7. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH
  1. Connect the connector.



  1. Engage the 14 claws to install the instrument cluster finish panel garnish.


    B223458



8. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    B223456
  1. Engage the 7 claws and 2 clips to install the lower center instrument cluster finish panel sub-assembly.



9. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    B223453
  1. Connect each connector.

  1. Engage the 6 claws to install the integration control and panel assembly.



10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Navigation System for HDD)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



11. INSTALL REAR NO. 3 FLOOR BOARD (w/ Navigation System for HDD)


    B227791
  1. Engage the 2 guides to install the rear No. 3 floor board.



12. INSTALL REAR DECK FLOOR BOX (w/ Navigation System for HDD)
  1. Install the rear deck floor box.



13. INSTALL REAR NO. 2 FLOOR BOARD (w/ Navigation System for HDD)


    B227788E01
  1. Engage the 3 guides <A>.

  1. Engage the 2 guides <B> and install the rear No. 2 floor board as shown in the illustration.