Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX

FRONT CONSOLE BOX > DISASSEMBLY

for Preparation Click here



1. REMOVE CONSOLE REAR END PANEL


    B279585
  1. Disengage the 10 claws to remove the console rear end panel.



2. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY


    B279586
  1. Using a screwdriver, pull out the box door hinge shafts.

    HINT:
    1. The illustration is for the LH side.
    2. Use the same procedure for the RH side and LH side.

  1. Remove the console compartment door sub-assembly.



3. REMOVE CONSOLE COMPARTMENT DOOR PAD SUB-ASSEMBLY


    B279587
  1. Disengage the 8 claws and remove the console compartment door pad sub-assembly.



4. REMOVE REAR CONSOLE COMPARTMENT DOOR BOX COVER


    B279588
  1. Pull the rear console compartment door box cover in the direction indicated by the arrow to disengage the claw and 5 guides, and remove the rear console compartment door box cover.



5. REMOVE NO. 2 CONSOLE COMPARTMENT DOOR INSERT


    B279590
  1. Pull the No. 2 console compartment door insert in the direction indicated by the arrow to disengage the 2 claws and 3 guides, and remove the No. 2 console compartment door insert.



6. REMOVE NO. 1 CONSOLE COMPARTMENT DOOR INSERT

HINT:
Use the same procedure as for the No. 2 console compartment door insert.



7. REMOVE NO. 2 BOX SIDE PANEL


    B279592E01
  1. Pull the No. 2 box side panel in the direction indicated by the arrow to disengage the 8 claws and guide, and remove the No. 2 box side panel as shown in the illustration.



8. REMOVE NO. 1 BOX SIDE PANEL

HINT:
Use the same procedure as for the No. 2 box side panel.



9. REMOVE FRONT CONSOLE BOX FILLER SUB-ASSEMBLY


    E236142
  1. Disengage the 4 claws and 2 guide, to remove the front console box filler sub-assembly.



10. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY


    E234568
  1. Disengage the 2 claws and remove the No. 1 stereo jack adapter assembly.



11. REMOVE CENTER POWER OUTLET SOCKET ASSEMBLY


    E236143E01
  1. Using a screwdriver, disengage the claw and remove the center power outlet socket assembly.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    Tape the screwdriver tip before use.



12. REMOVE CENTER POWER OUTLET SOCKET COVER


    E236145
  1. Disengage the 2 claws and remove the center power outlet socket cover.