Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX

FRONT CONSOLE BOX > REASSEMBLY

for Preparation Click here



1. INSTALL CENTER POWER OUTLET SOCKET COVER


    E236146
  1. Engage the 2 claws to install the center power outlet socket cover.



2. INSTALL CENTER POWER OUTLET SOCKET ASSEMBLY


    E236144
  1. Engage the claw to install the center power outlet socket assembly.



3. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY
  1. Engage the 2 claws to install the No. 1 stereo jack adapter assembly.



4. INSTALL FRONT CONSOLE BOX FILLER SUB-ASSEMBLY
  1. Engage the 2 guides and 4 claws, to install the front console box filler sub-assembly.



5. INSTALL NO. 2 BOX SIDE PANEL


    B279593E01
  1. Engage the 8 claws and guide to install the No. 2 box side panel as shown in the illustration.



6. INSTALL NO. 1 BOX SIDE PANEL

HINT:
Use the same procedure as for the No. 2 box side panel.



7. INSTALL NO. 2 CONSOLE COMPARTMENT DOOR INSERT


    B227326
  1. Engage the 2 claws and 3 guides to install the No. 2 console compartment door insert as shown in the illustration.



8. INSTALL NO. 1 CONSOLE COMPARTMENT DOOR INSERT

HINT:
Use the same procedure as for the No. 2 console compartment door insert.



9. INSTALL REAR CONSOLE COMPARTMENT DOOR BOX COVER


    B279589
  1. Engage the claw and 5 guides to install the rear console compartment door box cover as shown in the illustration.



10. INSTALL CONSOLE COMPARTMENT DOOR PAD SUB-ASSEMBLY


    B279587
  1. Engage the 8 claws to install the console compartment door pad sub-assembly.



11. INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY
  1. Temporarily install the console compartment door sub-assembly.



    B279594
  1. Push in the box door hinge shafts by hand as far as possible.

    HINT:
    1. The illustration is for the LH side.
    2. Use the same procedure for the RH side and LH side.



    B279595
  1. Using pliers, push in the box door hinge shafts completely and install the console compartment door sub-assembly.

    HINT:
    1. The illustration is for the LH side.
    2. Use the same procedure for the RH side and LH side.



12. INSTALL CONSOLE REAR END PANEL


    B279585
  1. Engage the 10 claws to install the console rear end panel.