AIRBAG CUT-OFF INDICATOR LIGHT > INSPECTION |
| 1. INSPECT PASSENGER SEAT BELT WARNING LAMP ASSEMBLY |
![]() |
Apply battery voltage to the connector and check the passenger airbag ON/OFF indicator condition.
| Connection | Result |
| Battery positive (+) → M2-6 (IG+) Battery negative (-) → M2-1 (PAON) | "ON" comes on |
| Battery positive (+) → M2-6 (IG+) Battery negative (-) → M2-5 (P-AB) | "OFF" comes on |
| *1 | Component without harness connected (Passenger Seat Belt Warning Light Assembly) |