LUMBAR SUPPORT ADJUSTER ASSEMBLY > INSPECTION |
| 1. INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY LH |
![]() |
Check operation of the lumbar support adjuster assembly LH.
Check if the seat moves smoothly when the battery is connected to the lumbar support adjuster assembly LH connector terminals.
| Measurement Condition | Specified Condition |
| Battery positive (+) → 1 Battery negative (-) → 2 | Hold |
| Battery positive (+) → 2 Battery negative (-) → 1 | Release |
| *1 | Hold |
| *2 | Release |
| *3 | Component without harness connected (Lumbar Support Adjuster Assembly LH) |
| 2. INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY RH |
![]() |
Check operation of the lumbar support adjuster assembly RH.
Check if the seat moves smoothly when the battery is connected to the lumbar support adjuster assembly RH connector terminals.
| Measurement Condition | Specified Condition |
| Battery positive (+) → 1 Battery negative (-) → 2 | Hold |
| Battery positive (+) → 2 Battery negative (-) → 1 | Release |
| *1 | Hold |
| *2 | Release |
| *3 | Component without harness connected (Lumbar Support Adjuster Assembly RH) |