Home › Vehicle Interior › HEATING / AIR CONDITIONING › SOLAR VENTILATION SWITCH

SOLAR VENTILATION SWITCH > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)


    B227761
  1. Disengage the 10 claws and remove the front door scuff plate LH.



2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for LHD)


    B227764
  1. Remove the clip.

  1. Disengage the 2 clips and remove the cowl side trim sub-assembly LH.



3. REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

HINT:
Use the same procedure as for the LH side.



4. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for RHD)

HINT:
Use the same procedure as for the LH side.



5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY


    B298862
  1. Remove the screw <C>.



    B298863
  1. Disengage the 6 claws and clip as shown in the illustration.



    B223463
  1. Disengage the claw and 2 guides and disconnect the hood lock control cable.

  1. Disconnect each connector and clamp, and remove the lower instrument panel finish panel assembly.



6. REMOVE SOLAR VENTILATION SWITCH (for LHD)


    E239904
  1. Disengage the 2 claws and remove the solar ventilation switch.



7. REMOVE SOLAR VENTILATION SWITCH (for RHD)


    E239905
  1. Disengage the 2 claws and remove the solar ventilation switch.