Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH BRAKE CANCEL SWITCH

PRE-CRASH BRAKE CANCEL SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY (for LHD)


    E188650
  1. Engage the 2 claws to install the pre-crash system cancel switch assembly.



2. INSTALL PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY (for RHD)


    E188651
  1. Engage the 2 claws to install the pre-crash system cancel switch assembly.



3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)
  1. Connect each connector.



    B223658
  1. Engage the guide and claw.

  1. Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <D>.



4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)
  1. Connect each connector.



    B223634
  1. Engage the guide and 2 claws.

  1. Install the No. 1 instrument panel under cover sub-assembly with the screw <D>.