Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH BRAKE CANCEL SWITCH

PRE-CRASH BRAKE CANCEL SWITCH > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    B223658
  1. Remove the 2 screws <D>.

  1. Disengage the claw and guide.

  1. Disconnect each connector and remove the No. 1 instrument panel under cover sub-assembly.



2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    B223634
  1. Remove the screw <D>.

  1. Disengage the 2 claws and guide.

  1. Disconnect each connector and remove the No. 1 instrument panel under cover sub-assembly.



3. REMOVE PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY (for LHD)


    E188650
  1. Disengage the 2 claws and remove the pre-crash system cancel switch assembly.



4. REMOVE PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY (for RHD)


    E188651
  1. Disengage the 2 claws and remove the pre-crash system cancel switch assembly.