HEADLIGHT LEVELING SWITCH > INSTALLATION |
| 1. INSTALL HEADLIGHT LEVELING SWITCH |
![]() |
Engage the 2 claws and install the headlight leveling switch.
| 2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY |
Connect each connector.
Engage the clamp.
![]() |
Engage the 2 guides and claw to connect the hood lock control cable.
![]() |
Engage the 6 claws and clip.
![]() |
Install the lower instrument panel finish panel assembly with the screw <C>.
| 3. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH |
![]() |
Engage the 2 clips.
Install the cowl side trim board LH with the clip.
| 4. INSTALL FRONT DOOR SCUFF PLATE LH |
![]() |
Engage the 10 claws to install the front door scuff plate LH.