COMBINATION METER > REASSEMBLY |
| 1. INSTALL NO. 3 COMBINATION METER CASE |
| 2. INSTALL NO. 1 COMBINATION METER REFLECTOR |
![]() |
Engage the clip and 9 guides to install the No. 1 combination meter reflector as shown in the illustration.
| 3. INSTALL NO. 3 METER LENS |
![]() |
Engage the 2 guides to install the No. 3 meter lens.
| 4. INSTALL NO. 2 METER LENS |
![]() |
Engage the 2 guides to install the No. 2 meter lens.
| 5. INSTALL COMBINATION METER CASE |
![]() |
Engage the 2 guides to install the combination meter case.
| 6. INSTALL NO. 3 METER CIRCUIT PLATE |
![]() |
Engage the 2 guides to install the No. 3 meter circuit plate.
| 7. INSTALL NO. 4 METER CIRCUIT PLATE |
![]() |
Connect the connector to install the No. 4 meter circuit plate to the No. 3 meter circuit plate.
| 8. INSTALL NO. 1 METER LENS |
![]() |
Engage the 2 guides to install the No. 1 meter lens.
| 9. INSTALL NO. 2 COMBINATION METER CASE |
![]() |
Engage the 2 guides to install the No. 2 combination meter case.
| 10. INSTALL NO. 2 METER CIRCUIT PLATE |
![]() |
Connect the connector to install the No. 5 meter circuit plate to the No. 2 meter circuit plate.
![]() |
Engage the 2 guides to install the No. 2 meter circuit plate.
![]() |
Connect the connector as shown in the illustration.
| 11. INSTALL NO. 4 COMBINATION METER COVER |
![]() |
Engage the 6 claws.
![]() |
Install the No. 4 combination meter cover with the 7 screws.
| 12. INSTALL NO. 1 COMBINATION METER COVER |
![]() |
Engage the 2 guides to install the No. 1 combination meter cover.
| 13. INSTALL NO. 2 COMBINATION METER COVER |
![]() |
Engage the 2 guides to install the No. 2 combination meter cover.
| 14. INSTALL METER CIRCUIT PLATE |
![]() |
Engage the 2 guides to install the meter circuit plate.
![]() |
Connect the connector as shown in the illustration.
| 15. INSTALL NO. 3 COMBINATION METER COVER |
![]() |
Engage the 7 claws and 2 guides.
![]() |
Install the No. 3 combination meter cover with the 3 screws.
| 16. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY |
![]() |
Install the instrument panel finish panel sub-assembly with the 6 screws.