HEADUP DISPLAY > DISASSEMBLY |
| 1. REMOVE COMBINATION METER MIRROR GLASS |
![]() |
Remove the 3 screws and combination meter mirror glass.
| 2. REMOVE NO. 1 COMBINATION METER MIRROR CASE |
![]() |
Remove the 2 screws.
Disengage the 3 claws to remove the No. 1 combination meter mirror case.
| 3. REMOVE COMBINATION METER MIRROR |
![]() |
Disconnect the connector.
Remove the 2 screws and combination meter mirror.
| 4. REMOVE NO. 1 COMBINATION METER MIRROR PLATE |
![]() |
Disengage the 2 claws and remove the No. 1 combination meter mirror plate as shown in the illustration.
| 5. REMOVE NO. 2 COMBINATION METER MIRROR |
![]() |
Remove the No. 2 combination meter mirror as shown in the illustration.
| 6. REMOVE NO. 2 COMBINATION METER MIRROR PLATE |
![]() |
Remove the 4 screws.
Disengage the 2 guides to remove the No. 2 combination meter mirror plate.
| 7. REMOVE NO. 2 COMBINATION METER MIRROR WIRE |
![]() |
Disengage the 3 clamps.
![]() |
Disengage the 2 guides as shown in the illustration.
![]() |
Disconnect the connector to remove the No. 2 combination meter mirror wire.
| 8. REMOVE COMBINATION METER MIRROR ECU |
![]() |
Disconnect the connector to remove the combination meter mirror ECU as shown in the illustration.
| 9. REMOVE COMBINATION DISPLAY |
![]() |
Remove the 3 screws and combination display.
![]() |
Disconnect the connector and remove the No. 2 combination meter mirror wire from the combination display as shown in the illustration.
| 10. REMOVE NO. 2 COMBINATION METER MIRROR CASE |