Home › Vehicle Interior › METER / GAUGE / DISPLAY › TRIP SWITCH

TRIP SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL TRIP SWITCH


    E113774
  1. Engage the 4 claws to install the trip switch.



2. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH
  1. Connect the connector.

  1. Engage the 14 claws to install the instrument cluster finish panel garnish.



3. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    B223456
  1. Engage the 7 claws and 2 clips to install the lower center instrument cluster finish panel sub-assembly.



4. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    B223453
  1. Connect each connector.

  1. Engage the 6 claws to install the integration control and panel assembly.