Home › Vehicle Exterior › MIRROR (EXT) › OUTER MIRROR SWITCH

OUTER MIRROR SWITCH > INSPECTION

for Preparation Click here



1. INSPECT OUTER MIRROR SWITCH


    B127553
  1. Inspect the outer mirror switch.

    1. Measure the resistance according to the value(s) in the table below when the switch is operated.

      HINT:
      Select "L" on the left/right adjustment switch.

      Tester Connection
      Switch Condition
      Specified Condition
      4 - 8
      Up
      Below 1 Ω
      6 - 7
      4 - 7
      Down
      6 - 8
      5 - 8
      Left
      6 - 7
      5 - 7
      Right
      6 - 8

      HINT:
      Select "R" on the left/right adjustment switch.
      Tester Connection
      Switch Condition
      Specified Condition
      3 - 8
      Up
      Below 1 Ω
      6 - 7
      3 - 7
      Down
      6 - 8
      2 - 8
      Left
      6 - 7
      2 - 7
      Right
      6 - 8

      If the result is not as specified, replace the outer mirror switch assembly.