BLOCKING SYSTEM > DTC CHECK / CLEAR |
| CHECK FOR TELEPHONE TRANSCEIVER ASSEMBLY DTC |
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Telematics / DTC.
Check for DTCs.
Check the details of the DTCs (Click here).
| CHECK FOR CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) DTC |
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Entry&Start / DTC.
Check for DTCs.
Check the details of the DTCs (Click here).
| CHECK FOR POWER MANAGEMENT CONTROL ECU (HV CPU) DTC |
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Powertrain / Hybrid Control / DTC.
Check for DTCs.
Check the details of the DTCs (Click here).
| CLEAR TELEPHONE TRANSCEIVER ASSEMBLY DTC |
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Telematics / DTC.
Clear the DTCs.
| CLEAR CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) DTC |
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Entry&Start / DTC.
Clear the DTCs.
| CLEAR POWER MANAGEMENT CONTROL ECU (HV CPU) DTC |
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Powertrain / Hybrid Control / DTC.
Clear the DTCs.