Home › Vehicle Interior › SEAT › POWER SEAT SWITCH

POWER SEAT SWITCH > REMOVAL

for Preparation Click here



1. REMOVE FRONT SEAT ASSEMBLY
(Click here)


2. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD


    B302427
  1. Remove the screw.

  1. Disengage the guide, 2 claws and clip, and remove the front inner No. 1 seat cushion shield.



3. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY


    B299212
  1. Disconnect the 4 connectors.

  1. Disengage the 6 clamps and disconnect the No. 1 front seat wire.



    B302428
  1. Disengage the clip.

  1. Disengage the 4 claws and guide, and disconnect the front seat cushion shield assembly as shown in the illustration.



    B299300E01
  1. Disconnect the 2 connectors.
    Text in Illustration 
    *1
    Clamp
    *2
    Hook

  1. Disengage the clamp and hook, and remove the front seat cushion shield assembly as shown in the illustration.



4. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    B302430
  1. Using a moulding remover, disengage the 4 claws and remove the slide and vertical power seat switch knob.



5. REMOVE RECLINING POWER SEAT SWITCH KNOB


    B302429
  1. Using a moulding remover, disengage the 4 claws and remove the reclining power seat switch knob.



6. REMOVE FRONT POWER SEAT SWITCH


    B269630
  1. Remove the 3 screws and front power seat switch.