Home › Vehicle Interior › SEAT › LUMBAR SWITCH (for Power Seat)

LUMBAR SWITCH (for Power Seat) > INSTALLATION

for Preparation Click here



1. INSTALL LUMBAR SWITCH (POWER SEAT SWITCH ASSEMBLY)
  1. Engage the 4 claws to install the lumbar switch (power seat switch assembly).



2. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY


    B299302E01
  1. Connect the 2 connectors.
    Text in Illustration 
    *1
    Clamp
    *2
    Hook

  1. Engage the clamp and hook as shown in the illustration.



    B312114
  1. Engage the guide and 4 claws as shown in the illustration.

  1. Engage the clip to install the front seat cushion shield assembly.



    B299212
  1. Engage the 6 clamps.

  1. Connect the 4 connectors.



3. INSTALL FRONT INNER NO. 1 SEAT CUSHION SHIELD


    B302427
  1. Engage the 2 claws and clip.

  1. Engage the guide to install the front inner No. 1 seat cushion shield to the front seat cushion shield with the screw.



4. INSTALL FRONT SEAT ASSEMBLY
(Click here)