Home › Vehicle Interior › SEAT › LUMBAR SWITCH (for Power Seat)

LUMBAR SWITCH (for Power Seat) > REMOVAL

for Preparation Click here



1. REMOVE FRONT SEAT ASSEMBLY
(Click here)


2. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD


    B302427
  1. Remove the screw.

  1. Disengage the guide, 2 claws and clip, and remove the front inner No. 1 seat cushion shield.



3. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY


    B299212
  1. Disconnect the 4 connectors.

  1. Disengage the 6 clamps and disconnect the No. 1 front seat wire.



    B302428
  1. Disengage the clip.

  1. Disengage the 4 claws and guide, and disconnect the front seat cushion shield assembly as shown in the illustration.



    B299300E01
  1. Disconnect the 2 connectors.
    Text in Illustration 
    *1
    Clamp
    *2
    Hook

  1. Disengage the clamp and hook, and remove the front seat cushion shield assembly as shown in the illustration.



4. REMOVE LUMBAR SWITCH (POWER SEAT SWITCH ASSEMBLY)


    B269632
  1. Disengage the 4 claws and remove the lumbar switch (power seat switch assembly).