NAVIGATION SYSTEM (for Navigation Receiver Type) > DATA LIST / ACTIVE TEST |
| DATA LIST |
Connect the intelligent tester to the DLC3.
Turn the power switch on (READY).
Turn the intelligent tester on.
Enter the following menus: Body / Navigation System / Data List.
According to the display on the intelligent tester, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Battery Voltage | Auxiliary battery voltage/ Min.: 0 V, Max.:24 V | 11 to 15.5 V | - |
| Active Dimmer | Active dimmer function/ON or OFF | ON: Active dimmer function on OFF: Active dimmer function off | - |
| Tail Light SW | Tail light switch/ON or OFF | ON: Light control switch in tail or head position OFF: Light control switch off | - |
| Reverse Signal | Reverse signal/ON or OFF | ON: Reverse selected OFF: Reverse not selected | - |
| Parking Brake | Parking brake switch/ON or OFF | ON: Parking brake applied OFF: Parking brake released | - |
| Ignition | Power switch/ON or OFF | ON: Power switch on (IG) OFF: Power switch off | - |
| Vehicle Speed | Maximum wheel speed sensor reading/Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) | Vehicle stopped: 0 km/h (0 mph) | When driving at constant speed: No large fluctuations |