Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Radio and Display Type)

NAVIGATION SYSTEM (for Radio and Display Type) > FREEZE FRAME DATA

for Preparation Click here



CHECK FREEZE FRAME DATA
  1. Connect the intelligent tester to the DLC3.

  2. Turn the power switch on (READY).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Navigation System / DTC.

  5. Select a DTC to display its Freeze Frame Data.


LIST OF FREEZE FRAME DATA
  1. Refer to "Data List / Active Test" (Click here).