Turn the power switch off.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Enter the following menus: Chassis / Tire Pressure Monitor / Data List.
Set the tire pressure to the specified value (Click here).
- NOTICE:
- Make sure the tires are cool when adjusting the tire pressure.
Display "ID Tire Inflation Pressure" in the Data List and check that the tire pressure values match the adjusted pressure amount.
- HINT:
- It may take a few minutes until the values are displayed.
Perform initialization (Click here).
- Result:
Condition
| Proceed to
|
Tire pressure warning light remains on
| A
|
Tire pressure warning light goes off
| B
|
- HINT:
- The warning threshold value changes depending on the driving conditions during initialization. As a result, the tire pressure warning light may not turn off even if the tire pressure is adjusted to the specified pressure.