Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID BATTERY SYSTEM

HYBRID BATTERY SYSTEM > TERMINALS OF ECU

for Preparation Click here



A216734E01


Text in Illustration 
*1
Battery Smart Unit
-
-

ECU TERMINAL CHART 
Terminal No.
(Symbols)
Wiring Color
Terminal Description
Condition
Standard (V)
z17-4 (TB2) - z17-10 (GB2)
L - L
Battery temperature sensor 2
HV battery temperature: -40 to 90°C (-40 to 194°F)
4.8 (-40°C (-40°F)) to 1.0 (90°C (194°F))
z17-5 (TB1) - z17-11 (GB1)
B - B
Battery temperature sensor 1
HV battery temperature: -40 to 90°C (-40 to 194°F)
4.8 (-40°C (-40°F)) to 1.0 (90°C (194°F))
z17-6 (TB0) - z17-12 (GB0)
W - W
Battery temperature sensor 0
HV battery temperature: -40 to 90°C (-40 to 194°F)
4.8 (-40°C (-40°F)) to 1.0 (90°C (194°F))
c1-1 (IB) - c1-6 (GIB)
P - B
Current sensor
Power switch on (READY)
0.5 to 4.5
c1-5 (VIB) - c1-6 (GIB)
G - B
Power source for battery current sensor
Power switch on (IG)
4.5 to 5.5
c1-4 (IGCT) - c1-8 (GND)
L - W-B
Control signal
Power switch on (READY)
11 to 14
c1-2 (BTH+) - c1-8 (GND)
R - W-B
Serial communication
Power switch on (IG)
Pulse generation
(waveform 1)
c1-3 (BTH-) - c1-8 (GND)
G - W-B
Serial communication
Power switch on (IG)
Pulse generation
(waveform 2)
c1-7 (VM) - c1-8 (GND)
V - W-B
Battery cooling blower No. 0 monitor signal
Cooling blower activated
0 to 5
c1-8 (GND) - Body ground
W-B
Ground
Always (continuity check)
Below 1 Ω

Oscilloscope waveforms

HINT:
Oscilloscope waveform samples are provided here for informational purposes. Noise and fluttering waveforms have been omitted.



    A112888E01
  1. Waveform 1
    Item
    Content
    Terminal
    c1-2 (BTH+) - c1-8 (GND)
    Equipment Setting
    2 V/DIV, 500 μs/DIV
    Condition
    Power switch on (IG)

    HINT:
    The waveform will vary depending on the content of the digital communication (digital signal).



  2. A112889E01
  3. Waveform 2
    Item
    Content
    Terminal
    c1-3 (BTH-) - c1-8 (GND)
    Equipment Setting
    2 V/DIV, 500 μs/DIV
    Condition
    Power switch on (IG)

    HINT:
    The waveform will vary depending on the content of the digital communication (digital signal).