ENGINE IMMOBILISER SYSTEM > GENERAL



OUTLINE
  1. The engine immobiliser system compares the ID code that is registered in the certification ECU* with the ID code of the transponder chip that is embedded in the smart key. The system is unset if these ID codes match. Thus, the certification ECU* and the power management control ECU communicate with each other to authorize the starting of the hybrid system (READY) through the operation of the power switch.
    *: The certification ECU is only available on the U.S.A. models. On Canadian models, the immobiliser code ECU that functions the same way as the certification ECU is added and used instead.

    HINT:
    When replacing the immobiliser code ECU or certification ECU, or making a new key, key recognition codes must be registered. For details, refer to the Repair Manual.