POWER DOOR LOCK CONTROL SYSTEM > DETAILS



FUNCTION
  1. The power door lock control system has the following functions and customizes:


Function
Outline
Customizable
Manual Lock and Unlock
This function can lock or unlock all the doors by the door lock switch LH or RH operation.
Standard
(Not Customizable)
Key-linked Lock and Unlock
This function which is linked with the door key cylinder can lock or unlock all the doors when a lock or unlock operation is effected.
Standard
(Not Customizable)
2-step Unlock
This function is provided to unlock the driver door when the key is turned in the key cylinder the first time, and to unlock the remaining doors when it is turned the second time.
Standard
(Customizable)
Shift-linked Automatic Door Lock
  1. When the conditions listed below are met consecutively, this function causes all the doors to be automatically locked.
    1. Shift position is in any position except P.
    2. The power switch is changed from off or on (ACC) to on (IG).
    3. All doors are closed.
    4. Any one of the doors is in an unlocked state.
Standard
(Customizable)
Speed-sensitive Automatic Door Lock
  1. When the conditions listed below are met, this function causes all the doors to be automatically locked.
    1. Vehicle speed is higher than approximately 20 km/h (12 mph).
    2. All doors are closed.
    3. Shift position is in any position except P.
    4. Any one of the doors is in an unlocked state.
Default setting is off.
(Customizable)
Shift-linked Automatic Door Unlock
When the power switch is on (IG), and the shift position is in P, all the doors will be automatically unlocked.
Standard
(Customizable)
Driver Door Opening-linked Automatic Door Unlock
All doors are automatically unlocked when the driver door is opened within 10 seconds after the power switch is changed from on (IG) to on (ACC) or off.
Default setting is off.
(Customizable)
Manual Unlock Prohibition
Performing the door lock operation with a mechanical key or LOCK button on the key will prohibit the unlock operation by the door lock switch.
Standard
(Not Customizable)
Electrical Back Door Outside Handle System
When the driver door is unlocked, the back door is closed and the vehicle speed is approximately 5 km/h (3 mph) or less, the latch on the back door can be released by operating the back door opener switch.
Standard
(Not Customizable)

HINT:
The customize setting can be turned on/off using the customized body electronics system. For details, refer to Repair Manual.