MONITOR SYSTEM > DETAILS



FUNCTION OF MAIN COMPONENTS
  1. The main components in the monitor system have the following functions:

    Component
    Function
    Rear Television Camera Assembly
    Captures images in rear of the vehicle and outputs visual signals to the radio and display receiver assembly*1 or navigation receiver assembly*2.
    Radio and Display Receiver Assembly*1
    Displays the images in rear of the vehicle from the rear television camera assembly.
    Navigation Receiver Assembly*2
    Power Management Control ECU
    Transmits a shift R position signal to the radio and display receiver assembly*1 or navigation receiver assembly*2.

    1. *1: Models with display audio system or 8-speaker surround sound system
    2. *2: Models with HDD navigation system


OPERATING CONDITION
  1. This system operates when all the conditions given below have been met:

    Operating Condition
    1. Power source is on (IG).
    2. The shift state is in reverse (R).
    3. Back door is closed.


FUNCTION


  1. Area Displayed on Screen

    1. On the display, objects on the right of the vehicle appear on the right side of the display panel, and objects on the left of the vehicle appear on the left side of the display panel.



    2. The rear television camera uses a wide-angle lens. The perceived distance from images that appear on the screen differs from the actual distance.


      Y103007

      HINT:
      Area displayed on screen may vary according to vehicle status or road conditions. The area covered by the rear television camera is limited. The rear television camera assembly dose not show objects close to either corner of the bumper or under bumper.


FAIL-SAFE
  1. The table below indicates the conditions of detecting malfunctions in rear view monitor system.

    Malfunction Parts
    Detection Item Function
    Function
    Rear Television Camera
    Transmission of rear television camera malfunction signal
    Radio and Display Receiver Assembly*1
    Stops signal reception and displays a dark screen.
    Navigation Receiver Assembly*2

    1. *1: Models with display audio system or 8-speaker surround sound system
    2. *2: Models with HDD navigation system


DIAGNOSIS
  1. The rear view monitor system for the radio and display receiver assembly or navigation receiver assembly is equipped with a diagnosis function which can display the diagnosis menu. For details, refer to the Repair Manual.