FEATURES > EQUIPMENT



OUTLINE
  1. Display Audio System

    1. The display audio system is a radio and display receiver assembly equipped with a 6.1-inch, EGA and Thin Film Transistor (TFT) display.

    2. The following are provided: AM/FM tuner, CD player, AUX (USB and iPod) jacks, Bluetooth hands-free function, Bluetooth audio function and rear view monitor function.

    3. The 6.1-inch display is used for the audio, Bluetooth, air conditioning and driving information displays.

  2. Premium Display Audio System

    1. An extension module is added to the radio and display receiver assembly to realize a premium display audio unit with a navigation system.

    2. The premium display audio system supports the Entune service. The Entune service makes it possible to operate specified applications on the navigation system by using Bluetooth to connect the navigation system to a cellular phone with the Toyota Entune application installed. These applications are displayed on and operated from the multi-display.

    3. The premium display audio system has the XM satellite radio tuner and HD radio tuner.

  3. Hard Disk Drive (HDD) Navigation System

    1. The HDD navigation system has the features of 4 systems (audio system, Bluetooth hands-free system, Bluetooth audio system and navigation system).

    2. The HDD navigation system supports the Entune service. The Entune service makes it possible to operate specified applications on the navigation system by using Bluetooth to connect the navigation system to a cellular phone with the Toyota Entune application installed. These applications are displayed on and operated from the multi-display.

    3. The HDD navigation system has the XM satellite radio tuner and HD radio tuner.

  4. Navigation System

    1. Through the use of the Global Positioning System (GPS) and map data which is stored on a flash drive*1 or Hard Disk Drive (HDD)*2, the navigation system analyzes the position of the vehicle and indicates that position on the map that is displayed on the display.
      *1: Models with premium display audio system
      *2: Models with HDD navigation system

  5. Entune Service

    1. The Entune service enables a communication between the navigation system, application server and content provider utilizing the Toyota exclusive Entune applications downloaded on the cellular phone.

  6. XM Satellite Radio

    1. XM satellite radio is a service that uses the signals from 2 satellites in geostationary orbit to make it possible to capture digital radio broadcasts (XM satellite radio) from over 170 channels. XM satellite radio enables users to constantly receive their favorite programs.

  7. HD Radio

    1. In-Band On-Channel (IBOC) type digital radio broadcasts (HD Radio) can be received. In- Band On-Channel (IBOC) adds digital signals to the existing analog signal band range and both sidebands, enabling analog FM-sound quality for AM stations and CD-sound quality for FM stations. When the digital signals cannot be received, the radio automatically switches to analog signal reception mode.



  8. Bluetooth Hands-free System

    1. Bluetooth is a short-distance, high-speed wireless data communication system that uses the 2.4 GHz frequency band prescribed by the Bluetooth Special Interest Group (SIG).



    2. This system enables drivers to place or receive phone calls using a cellular phone without releasing their hands from the steering wheel.

      Y101897
      "Bluetooth" is a trademark owned by Bluetooth SIG, Inc.


      V102159

  9. Safety Connect System

    1. Safety Connect is a telematics service that reports the current vehicle location using the Global Positioning System (GPS) and emergency assistance using a cellular service (telephone function) in the event of an accident or vehicle theft. In accordance with the situation, the call center quickly calls the police or an ambulance via the Public Safety Answering Point (PSAP) and contacts Roadside Assistance services.

    2. Safety Connect offers 4 types of services*: Automatic Collision Notification (ACN) service is activated when an airbag is deployed during a collision or a collision is detected, emergency assistance button (SOS) service and Roadside Assistance service can be activated when the manual (SOS) switch is operated during an emergency and Stolen Vehicle Location service is activated when the driver alerts in the event of a vehicle theft.

      HINT:
      *: A Safety Connect service requires a Safety Connect subscription.



  10. Meter / Gauge System

    1. A reflective virtual image display meter is used. The system shortens the movement of a driver's line of sight when the driver checks the road conditions and meter display, since the indications on the display such as the vehicle speed, remaining fuel amount, instant fuel consumption and shift position seem as if they were in the distance.

    2. A multi-information display which offers support information for fuel-efficient driving is provided in the center of the combination meter. The fuel consumption and hybrid control system information, warning messages, dynamic radar cruise control system, pre-collision system and lane-keeping assist system information are also displayed on the multi-information display.



    3. When the steering pad switch is touched, the touch tracer display to display the switch and finger positions is displayed on the combination meter assembly, reducing the movement of the driver's line of sight.


      V102160E01


      Text in Illustration 
      *1
      Combination Meter Assembly (This illustration is an example of U.S.A. models.)
      *2
      Reflective Virtual Image Display
      *3
      Multi-information Display
      *4
      Touch Tracer Display
      *5
      Steering Pad Switch Assembly
      -
      -



  11. LED Headlight System



    1. An LED headlight system, capable of instantly flashing, and of ensuring a long service life, is used in the low beam headlight.


      V102161E01


      Text in Illustration 
      *1
      Low Beam
      -
      -



  12. Lane-keeping Assist System

    1. The lane-keeping assist system recognizes the lane marker by using the lane recognition camera sensor, and assists the driver's steering operation to help keep the vehicle in the lane by using the Electric Power Steering (EPS).

    2. The lane departure warning function alerts the driver to unintentional deviation from the lane by sounding the buzzer, displaying a warning message on the multi-information display and applying a small amount of steering force when the vehicle is about to deviate from the lane.



    3. The lane-keeping assist function assists the driver's steering operation to help keep the vehicle near the center of the lane by using the EPS when the dynamic radar cruise control system is activated.


      V100240E03


      Text in Illustration 
      *A
      Lane Departure Warning Function
      *B
      Lane-keeping Assist Function



  13. Solar Ventilation System



    1. A solar ventilation system is used. The system drives the blower motor in the blower unit assembly by using power generated by the solar module assembly, thus suppressing an increase in the cabin temperature.


      V100251



  14. Remote Air Conditioning System



    1. A remote air conditioning system is used. The system drives the electric inverter compressor assembly by using power stored in the HV battery through a remote operation of pressing the remote air conditioning switch on the key, thus allowing the air conditioning system to operate.


      V102165



  15. Ecological Plastic



    1. Ecological plastic is used for some interior parts. The ecological plastic is made from plants which consume carbon dioxide to grow by photosynthesis. After any vehicle parts that are manufactured from the ecological plastic are used, they are disposed of by thermal recycling with combustion, emitting carbon dioxide into the air. However, this carbon dioxide never increases the amount of carbon dioxide emissions in the air since it is the captured carbon dioxide created in photosynthesis. As a result, petroleum can be saved and also carbon dioxide emissions in the air can be decreased. The following parts are made of 2 kinds of ecological plastic materials.

      1. Injection molded parts made of alloy materials including polylactic acid (PLA) made of plant materials from corn and polypropylene (PP) are used for the cowl side trim, scuff plate and deck trim cover.
      2. Form-molded parts that are made of plant oil-based polyurethane materials containing 15% ricinus oil are used for the driver's seat cushion pad.

      V100237E01



  16. Colored Wire Harness



    1. The vehicle wire harness uses a colored wire harness on which 2 areas are colored in the vicinity of the insulator, thus reducing the kinds of harnesses.


      V100304E02


      Text in Illustration 
      *A
      2-stripe colored type
      *B
      4-stripe colored type
      *1
      Terminal
      *2
      Colored area
      *3
      Insulator
      -
      -
      *a
      11 mm (0.43 in.)
      *b
      3 mm (0.12 in.)
      *c
      22 mm (0.87 in.)
      *d
      16 mm (0.63 in.)
      *e
      27 mm (1.06 in.)
      -
      -

  17. Exterior Color

    Color No.
    Color Name
    Color No.
    Color Name
    040
    Super White II
    070
    White Pearl Crystal Shine
    1F7
    Silver Metallic
    202
    Black
    3P2
    Bordeaux Mica
    -
    -
    3R3
    Red Mica Metallic
    781
    Frosty Green Mica
    8S6
    Dark Blue Mica
    8V1
    Abyss Gray Metallic