WIPER AND WASHER SYSTEM > DETAILS



FUNCTION OF MAIN COMPONENTS
  1. Wiper and Washer System

    1. The wiper and washer system comprises the following parts and functions:

      Component
      Function
      Wiper and Washer Switch Assembly (Built into Front Wiper Relay)
      Outputs the position signal of the wiper and washer switch assembly to the front wiper motor and link assembly and the rear wiper motor assembly.
      Front Wiper Motor and Link Assembly
      Activates the front wiper in accordance with control signal from the wipe and washer switch assembly.
      Rear Wiper Motor Assembly (Built into Rear Wiper Relay)
      Activates the rear wiper in accordance with the position signal from the wiper and washer switch assembly.
      Windshield Washer Jar Assembly
      Activates the front washer motor and pump assembly, rear washer motor and pump assembly, headlight cleaner and motor and pump assembly in accordance with the signal from the washer switch.

      1. *: Models for LED headlight system

  2. Headlight Cleaner System

    1. The headlight cleaner system comprises the following parts and functions:

      Component
      Function
      Headlight Cleaner Switch Assembly
      The user operates this switch to operate the headlight cleaner headlight wiper switch assembly.
      Headlight Cleaner Motor and Pump Assembly
      Sends the washer fluid to the headlight cleaner in accordance with the signals from the headlight cleaner switch assembly.
      Headlight Cleaner Control Relay
      Receives the signals from the headlight cleaner switch assembly, washer switch and main body ECU and controls the headlight cleaner motor and pump assembly.
      Main Body ECU
      Sends the headlight low beam illumination signal to the headlight cleaner control relay.
      Headlight Cleaner Actuator Sub-assembly
      The pressure of the washer fluid sent by the headlight cleaner and motor assembly pushes out the headlight cleaner washer nozzles.
      Headlight Cleaner Washer Nozzle
      Sprays the washer fluid sent by the headlight cleaner and motor assembly onto the headlights.


OPERATING CONDITION
  1. Headlight Cleaner System

    1. The headlight cleaner operates as follows:

      Headlight Low Beam
      Headlight Cleaner Switch Assembly
      Windshield Washer Switch Assembly
      ON
      ON (First Time)
      ON (Second Time or later)
      Turn ON
      Activated
      Activated
      Not Activated
      Turn OFF
      Activated
      Not Activated
      Not Activated


SYSTEM CONTROL


  1. Washer-Linked Wiper

    1. When the wiper and washer switch assembly is set to OFF and the washer switch is turned on for approximately 0.2 seconds or more, the wipers start operating in LO at the same time as the washer fluid is sprayed.



    2. The wipers operate 3 times in LO after the washer switch is turned off.


      Y101945E01

  2. Headlight Cleaner System

    1. When the power switch is on, pressing the headlight cleaner switch assembly will cause the headlight cleaner and motor assembly to operate for a predetermined length of time.

    2. When the power switch is on and the headlights are turned on to low beam, pressing the washer switch once will cause the headlight cleaner and motor assembly to operate.


CONSTRUCTION


  1. Windshield Washer Nozzle



    1. Spray type washer nozzles are located under the engine hood to ensure good appearance. These nozzles can spray windshield washer fluid over a wide area by spraying it in a fan shape. The washer fluid volume has been reduced so as not to hinder the driver's view when the washer system is operated.


      Y101948E02


      Text in Illustration 
      *1
      Hood
      *2
      Washer Nozzle
      *3
      Fluid Volume
      *4
      Main Flow Center
      *a
      View from A
      -
      -

      HINT:
      Spray type washer nozzles cannot be adjusted because of their structure. Do not attempt to adjust the nozzles as it could damage them. If adjustment is necessary, adjust the nozzles after replacing them with those selected from 3 part numbers with different spray angles. For details, refer to the Repair Manual.



  2. Rear Washer Nozzle



    1. Washer nozzle is located on the back door panel.


      Y101949E02


      Text in Illustration 
      *1
      Back Door Panel
      *2
      Washer Nozzle
      *3
      Left of Main Flow Center
      *4
      Right of Main Flow Center
      *5
      Nozzle Center Axis
      -
      -
      *a
      View from A
      -
      -