PRE-COLLISION SYSTEM > GENERAL |
| OUTLINE |
Pre-Collision System (PCS)
The pre-collision system predicts the possible collision of the vehicle with an obstacle, based on information received from various sensors. The obstacle may be a vehicle traveling in the opposite direction. PCS lessens the damage sustained in the collision by working in unison with other systems to optimize the characteristics of the occupant protection devices such as the seat belt retraction mechanism, and systems that dampen the impact of a collision, such as the brake control system.
This system uses a millimeter wave radar sensor to predict a possible collision with a vehicle or obstacle in front. It retracts the seat belts before the collision and effects brake assist control and brake control.

| PRECAUTION |
When the millimeter wave radar sensor detects an object in front of the vehicle under the following conditions, the driving support ECU may determine that a collision is unavoidable, and operate the pre-collision system. This does not indicate a malfunction.

| *a | Object on road surface at corner entrance (Guard Rail, Street Light, Sign, Signboard) | *b | Opposing traffic vehicle while cornering |
| *c | Narrow iron bridge | *d | Metal object, steel plate, or bump on road surface |
| *e | Opposing traffic at intersection | - | - |
The millimeter wave radar sensor might not be able to detect the following objects as collision objects:
| Objects that cannot be detected | Plastic items (Safety Cones, etc.), etc. |
| Objects that cannot be detected in a stable manner | People, Bicycles, Motorcycles, Trees, Animals, Snow Fence, etc. |