HYBRID TRANSAXLE SYSTEM > DETAILS



CONSTRUCTION


  1. Hybrid Vehicle Transaxle Assembly

    1. This transaxle consists primarily of MG1, MG2, a compound gear unit, a transaxle damper, a counter gear, a final gear, a differential gear unit and an oil pump.

    2. This transaxle has a three-shaft configuration. The compound gear unit, a transaxle damper, an oil pump, MG1, and MG2 are provided on the input shaft. The counter driven gear and the final drive gear are provided on the second shaft. The final driven gear and the differential gear unit are provided on the third shaft.



    3. The engine, MG1 and MG2 are mechanically joined via the compound gear unit.


      V100235E01


      Text in Illustration 
      *1
      MG1
      *2
      MG2
      *3
      Compound Gear Unit
      *4
      Transaxle Damper (Transmission Input Damper Assembly)
      *5
      Counter Driven Gear
      *6
      Final Drive Gear
      *7
      Final Driven Gear
      *8
      Differential Gear Unit
      *9
      Oil Pump
      -
      -



  2. Compound Gear Unit

    1. The compound gear unit consists of the power split planetary gear unit and the motor speed reduction planetary gear unit. Each planetary ring gear is integrated with the compound gear. Furthermore, this compound gear is integrated with a counter drive gear and parking gear.

    2. The power split planetary gear unit splits the motive force of the engine two ways: one to drive the wheels, and the other to drive MG1, so that MG1 can function as a generator.



    3. The motor speed reduction planetary gear unit, whose purpose is to reduce MG2 speed, is used to enable the high-speed, high-output MG2 to adapt optimally to the compound gear.


      X101368E01


      Text in Illustration 
      *1
      Compound Gear Unit
      *2
      Power Split Planetary Gear Unit
      *3
      Counter Drive Gear (Compound Gear)
      *4
      Motor Speed Reduction Planetary Gear Unit



    4. The connection of the sun gear, ring gear and carrier of each planetary gear unit is as shown below.

      Item
      Connection
      Power Split Planetary Gear Unit
      Sun Gear
      MG1
      Ring Gear
      Compound Gear (to Wheels)
      Carrier
      Engine Output Shaft
      Motor Speed Reduction Planetary Gear Unit
      Sun Gear
      MG2
      Ring Gear
      Compound Gear (to Wheels)
      Carrier
      Fixed


      X101369E01


      Text in Illustration 
      *1
      MG1
      *2
      MG2
      *3
      Power Split Planetary Gear Unit
      *4
      Motor Speed Reduction Planetary Gear Unit
      *5
      Counter Drive Gear
      *6
      Sun Gear
      *7
      Ring Gear
      *8
      Carrier
      *9
      Counter Driven Gear
      -
      -



  3. Transaxle Damper



    1. A transaxle damper that consists of a coil spring with low-twist characteristics is used in order to absorb the torque fluctuation in the motive force of the engine. The torque limiter uses a dry-type, single-plate friction material. Through the use of these parts, a damper construction that excels in absorbing the vibrations of the engine motive force has been achieved.


      X101718E01


      Text in Illustration 
      *1
      A-A Cross Section
      *2
      Torque Limiter
      *3
      Coil Spring
      *4
      from Engine



  4. Oil Pump Mechanism



    1. The oil pump consists of the oil pump drive shaft, oil pump drive rotor, oil pump driven rotor and oil pump cover. The pump is driven by the engine via the main shaft and lubricates the gears.


      X101719E01


      Text in Illustration 
      *1
      Oil Pump Drive Shaft
      *2
      Oil Pump Drive Rotor
      *3
      Oil Pump Driven Rotor
      *4
      Oil Pump Cover



  5. Oil Sling Type Lubrication Mechanism

    1. This lubrication mechanism uses a final gear, which employs an oil sling type lubrication method via oil catch tanks. This construction minimizes the drive torque of the oil pump, which reduces the drive loss.



    2. An oil catch tank is used in this transaxle in order to supply oil in a stable manner. The oil catch tank temporarily stores the oil that is slung up, and supplies oil to each gear train from there. Furthermore, oil holes are provided in the oil catch tanks in order to efficiently supply oil to MG1 and MG2.


      X101720E01


      Text in Illustration 
      *1
      Main Shaft
      *2
      Oil Hole
      *3
      Oil Catch Tank
      *4
      Second Shaft
      *5
      Final Gear Rotational Direction
      *6
      Third Shaft
      *7
      Final Gear
      -
      -


OPERATION


  1. Motive Force Transmission Path



    1. The motive force created by the engine and MG2 is transmitted by the counter drive gear of the compound gear unit, the counter driven gear, the final drive gear, and then the differential gear unit, in order to drive the front wheels.


      X101797E01


      Text in Illustration 
      *1
      Engine
      *2
      Transaxle Damper
      *3
      MG1
      *4
      Compound Gear Unit
      *5
      Sun Gear
      *6
      MG2
      *7
      Oil pump
      *8
      Ring Gear
      *9
      Carrier
      *10
      Counter Drive Gear (Compound Gear)
      *11
      Final Drive Gear
      *12
      Counter Driven Gear
      *13
      Final Driven Gear
      *14
      Differential Gear Unit



  2. Engine Motive Force and MG2 Motive Force Transmission



    1. The engine motive force, which is input by the carrier, is output to the ring gear. The motive force of MG2 is output to the ring gear via the motor speed reduction planetary gear unit. The sum of these two motive forces is transmitted by the compound gear in order to drive the wheels.


      X101783E01


      Text in Illustration 
      *1
      MG1
      *2
      MG2
      *3
      Power Split Planetary Gear Unit
      *4
      Motor Speed Reduction Planetary Gear Unit
      V100135
      Rotation Direction
      V100136
      from Engine
      V100137
      from MG2
      V100138
      to Wheel



  3. MG2 Motive Force Transmission



    1. The motive force of MG2 is transmitted via the sun gear and is output to the ring gear, in order to drive the wheels. The carrier of the motor speed reduction planetary gear unit is fixed. As a result, the motor speed reduction planetary gear unit reduces the speed of MG2, increasing torque, in accordance with a set gear ratio. The rotation directions of forward and reverse becomes the opposite direction.


      X101784E01


      Text in Illustration (Driving in Forward:) 
      *1
      MG1
      *2
      MG2
      *3
      Power Split Planetary Gear Unit
      *4
      Motor Speed Reduction Planetary Gear Unit
      V100135
      Rotation Direction
      V100136
      from MG2
      V100137
      to wheel
      -
      -

      X101785E01


      Text in Illustration (Driving in Reverse:) 
      *1
      MG1
      *2
      MG2
      *3
      Power Split Planetary Gear Unit
      *4
      Motor Speed Reduction Planetary Gear Unit
      V100135
      Rotation Direction
      V100136
      from MG2
      V100137
      to Wheel
      -
      -



  4. Engine Motive Force Transmission



    1. The engine motive force, which is input by the carrier, is output to the sun gear. Thus, motive force is transmitted in order to operate MG1 as a generator.


      X101786E01


      Text in Illustration 
      *1
      MG1
      *2
      MG2
      *3
      Power Split Planetary Gear Unit
      *4
      Motor Speed Reduction Planetary Gear Unit
      V100135
      Rotation Direction
      V100136
      from Engine
      V100137
      to MG1
      -
      -



  5. MG1 Motive Force Transmission



    1. The motive force of MG1 is transmitted via the sun gear and is output to the carrier. Thus, motive force is transmitted in order to start the engine.


      X101787E02


      Text in Illustration 
      *1
      MG1
      *2
      MG2
      *3
      Power Split Planetary Gear Unit
      *4
      Motor Speed Reduction Planetary Gear Unit
      V100135
      Rotation Direction
      V100136
      from MG1
      V100137
      to Engine
      -
      -