FRONT SEAT ASSEMBLY (for Power Seat) > DISASSEMBLY |
| 1. REMOVE SEAT ADJUSTER COVER CAP |
![]() |
Remove the seat adjuster cover cap.
| 2. REMOVE FRONT SEAT INNER BELT ASSEMBLY |
Disconnect each connector.
Disengage each clamp.
![]() |
Remove the nut and front seat inner belt assembly.
| 3. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD |
![]() |
Remove the screw.
Disengage the guide, 2 claws and clip, and remove the front inner No. 1 seat cushion shield.
| 4. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY |
![]() |
Disconnect the 4 connectors.
Disengage the 6 clamps and disconnect the No. 1 front seat wire.
![]() |
Disengage the clip.
Disengage the guide as shown in the illustration.
Disengage the 5 claws and disconnect the front seat cushion shield assembly.
![]() |
Disconnect the 2 connectors.
Disengage the clamp and remove the front seat cushion shield assembly.
| 5. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
![]() |
Using a moulding remover, disengage the 4 claws and remove the slide and vertical power seat switch knob.
| 6. REMOVE RECLINING POWER SEAT SWITCH KNOB |
![]() |
Using a moulding remover, disengage the 4 claws and remove the reclining power seat switch knob.
| 7. REMOVE FRONT POWER SEAT SWITCH |
![]() |
Remove the 3 screws and front power seat switch.
| 8. REMOVE LUMBAR SWITCH (POWER SEAT SWITCH ASSEMBLY) |
![]() |
Disengage the 4 claws and remove the lumbar switch (power seat switch assembly).
| 9. REMOVE NO. 1 FRONT SEAT WIRE |
![]() |
Disengage the 2 claws and 2 clamps, and remove the No. 1 front seat wire from the front seat cushion shield.
| 10. REMOVE FRONT INNER SEAT CUSHION SHIELD |
![]() |
Disengage the 5 claws and remove the front inner seat cushion shield.
| 11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD |
![]() |
Disconnect the rubber band.
![]() |
Disengage the 4 hooks.
![]() |
Disengage the 3 clamps and disconnect the seat heater wire harness.
![]() |
Disconnect the connector.
Disengage the clamp and disconnect the seat heater wire harness.
Disengage the fastener and disconnect the side airbag wire harness.
![]() |
Disengage the 2 hooks as shown in the illustration.
Disengage each hook and remove the separate type front seat cushion cover with pad from the front seat cushion spring sub-assembly as shown in the illustration.

| 12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER |
![]() |
Remove the 2 hog rings
![]() |
Remove the 11 hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.
| 13. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD |
![]() |
Remove the 2 hog rings.
![]() |
Remove the 3 hog rings.
![]() |
Pull out the lower part of 2 fasteners from the separate type front seatback cover as shown in the illustration.
![]() |
Open the 2 fasteners.
![]() |
Remove the 3 hog rings and disconnect the 2 fastening rubbers.
| *1 | Fastening Rubber |
![]() |
Disengage the 2 hooks.
![]() |
Turn back the separate type front seatback cover to remove the nut, and separate the bracket of the separate type front seatback cover.
![]() |
Disengage the 4 claws and remove the 2 front seat headrest supports.
Remove the separate type front seatback cover with pad from the separate type front seatback spring assembly.
| 14. REMOVE SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Remove the 5 hog rings.
![]() |
Remove the 2 hog rings and the separate type front seatback cover from the separate type front seatback pad.
| 15. REMOVE NO. 2 FRONT SEAT WIRE |
![]() |
Disconnect the 2 connectors.
Disengage the 3 clamps and remove the No. 2 front seat wire from the separate type front seatback spring assembly.
| 16. REMOVE RECLINING ADJUSTER INSIDE COVER LH |
![]() |
Disengage the 2 guides and remove the reclining adjuster inside cover LH.
| 17. REMOVE RECLINING ADJUSTER INSIDE COVER RH |
| 18. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH |
![]() |
Disengage the hook as shown in the illustration.
![]() |
Remove the screw.
Disengage the clip and remove the front seat lower cushion shield LH.
| 19. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH |
| 20. REMOVE NO. 2 FRONT SEAT CUSHION PROTECTOR |
![]() |
Remove the screw.
Disengage the 2 guides and remove the No. 2 front seat cushion protector.
| 21. REMOVE NO. 1 FRONT SEAT CUSHION PROTECTOR |
| 22. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY |
Remove the 4 bolts.

Disengage the 4 guides and remove the separate type front seatback spring assembly from the separate type front seat cushion spring assembly.
| 23. REMOVE FRONT SEAT SIDE AIRBAG ASSEMBLY |
![]() |
Disengage the 2 clamps.
Remove the 2 nuts and the front seat side airbag assembly.