Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Navigation Receiver Type)

NAVIGATION SYSTEM (for Navigation Receiver Type) > CD/DVD Sound Skips

for Preparation Click here


INSPECTION PROCEDURE

NOTICE:
After replacing the navigation ECU sub-assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary.

1.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc



NG
DISC IS FAULTY
OK


2.CHECK DISC


    I100151
  1. Check the disc.

    OK:
    The disc is clean.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.

    HINT:
    If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.



NG
CLEAN DISC
OK


3.REPLACE DISC AND RECHECK
  1. Replace the disc with a known good one and check that the malfunction disappears.

    OK:
    Malfunction disappears.



NG
Go to step 4
OK

END 

4.CHECK NAVIGATION ECU SUB-ASSEMBLY
  1. Check the navigation ECU sub-assembly installation condition.

    1. Check that the navigation ECU sub-assembly is properly installed.

      OK:
      Navigation ECU sub-assembly is properly installed.



NG
REINSTALL NAVIGATION ECU SUB-ASSEMBLY
OK

REPLACE NAVIGATION ECU SUB-ASSEMBLY (Click here)