Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Navigation Receiver Type)

NAVIGATION SYSTEM (for Navigation Receiver Type) > Voice Guidance does not Function

for Preparation Click here


INSPECTION PROCEDURE

NOTICE:
After replacing the navigation ECU sub-assembly of vehicles subscribed to pay-type satellite radio broadcasts, registration of the XM radio ID is necessary.

1.CHECK NAVIGATION SETTING


    E225803E01
  1. Display the "Voice Settings" screen.

  1. Check that "Off" is not selected.

    OK:
    "Off" is not selected.

    Text in Illustration 
    *a
    Example



NG
SELECT VOICE VOLUME SETTING OTHER THAN "Off"
OK


2.CHECK NAVIGATION SETTING


    E225804E01
  1. Display the "Voice Settings" screen.

  1. Check that "Auto Voice Guidance" is not "Off".

    OK:
    "Auto Voice Guidance" is not "Off".

    Text in Illustration 
    *a
    Example



NG
TURN AUTO VOICE GUIDANCE "On"
OK


3.CHECK NAVIGATION SETTING


    E225805E01
  1. Display the "Voice Settings" screen.

  1. Check that "Voice Guidance in All Modes" is not "Off".

    OK:
    "Voice Guidance in All Modes" is not "Off".

    Text in Illustration 
    *a
    Example



NG
TURN VOICE GUIDANCE IN ALL MODES "On"
OK


4.CHECK AUDIO FUNCTION
  1. Check that sound can be heard from a front speaker.

    OK:
    Sound can be heard.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE NAVIGATION ECU SUB-ASSEMBLY (Click here)