Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Radio and Display Type)

NAVIGATION SYSTEM (for Radio and Display Type) > Cursor or Map Rotates when Vehicle Stopped

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK CONDITION


    E106418
  1. Check with the customer if the vehicle has been turned by a turntable.

    OK:
    Vehicle has not been turned by a turntable.

    HINT:
    If the vehicle is turned on a turntable with the power switch on (ACC or IG) , the system may store the angular velocity. As a result, the vehicle position cursor may deviate. In this case, the vehicle position cursor will return to normal by turning the power switch off and back to on (ACC or IG) again with the vehicle completely stopped.



NG
TURN POWER SWITCH ON (ACC OR IG) WHEN VEHICLE IS COMPLETELY STOPPED
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)