Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Navigation Receiver Type)

NAVIGATION SYSTEM (for Navigation Receiver Type) > Cellular Phone cannot Make Outgoing/Incoming Calls

for Preparation Click here


INSPECTION PROCEDURE

NOTICE:
After replacing the navigation ECU sub-assembly of vehicles subscribed to pay-type satellite radio broadcasts, registration of the XM radio ID is necessary.

1.CHECK "Bluetooth" SETTINGS
  1. Check if the cellular phone is registered as a connected device and the "Bluetooth" settings are correct.

    OK:
    The cellular phone is registered as a connected device and "Bluetooth" settings are correct.



NG
SET SETTINGS CORRECTLY
OK


2.CHECK SETTINGS AND CONDITIONS
  1. Check the cellular phone functions.

    HINT:
    The cellular phone is unable to call under any of the following conditions:
    1. The cellular phone is locked.
    2. The directory is being transferred.
    3. The line is crossed.
    4. The cellular phone is outside service range.
    5. The power is off.
    6. The battery is low.
    7. The cellular phone is not connected via "Bluetooth".

      OK:
      None of the above conditions exist.



NG
SET CORRECTLY
OK


3.CHECK RECEPTION
  1. Place the cellular phone close to the navigation ECU sub-assembly.

  1. Set the cellular phone so that it can receive calls.

  1. Check if the cellular phone has reception according to the navigation ECU sub-assembly.

    OK:
    The cellular phone has reception.



NG
Go to step 4
OK

END 

4.CHECK CELLULAR PHONE
  1. Check if the cellular phone can make a call.

    HINT:
    The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.

    OK:
    Cellular phone can make a call.



NG
REPAIR OR REPLACE CELLULAR PHONE
OK


5.RESTART CELLULAR PHONE
  1. Restart the cellular phone.

  1. Register the cellular phone as a connected device again and check that the malfunction disappears.

    OK:
    Malfunction disappears.



NG
Go to step 6
OK

END 

6.CHECK CELLULAR PHONE
  1. Check if the cellular phone is "Bluetooth" compatible.

    HINT:
    Some versions of "Bluetooth" compatible cellular phones may not function.

    OK:
    The phone is "Bluetooth" compatible.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)