except Canada
Malfunctioning ECU
| Condition
| Procedure
| Reference
|
Certification ECU (Smart key ECU assembly)
| Customer has brought all keys
| 1. Replace certification ECU (smart key ECU assembly)
| -
|
2. Reregister all keys (new key ID registration)
| PROCEDURE "B"
|
3. Register ECU communication ID
| PROCEDURE "G"
|
Some keys are lost
| Key ID codes can be registered and erased
| 1. Erase key codes (key ID erasure)
| PROCEDURE "D"
|
2. Perform additional key registration procedure (additional key ID registration)
| PROCEDURE "C"
|
3. Replace certification ECU (smart key ECU assembly)
| -
|
4. Reregister all keys (new key ID registration)
- HINT:
- If some keys are not registered during the above steps, they will be disabled because they cannot be registered later.
| PROCEDURE "B"
|
5. Register ECU communication ID
| PROCEDURE "G"
|
Key ID codes cannot be either registered or erased
| 1. Replace certification ECU (smart key ECU assembly)
| -
|
2. Replace transmission control ECU assembly
| -
|
3. Reregister all keys (new key ID registration)
- HINT:
- If some keys are not registered during the above steps, they will be disabled because they cannot be registered later.
| PROCEDURE "A"
|
4. Register ECU communication ID
| PROCEDURE "G"
|
Certification ECU (Smart key ECU assembly)
| All keys are lost
| 1. Replace certification ECU (smart key ECU assembly)
| -
|
2. Replace transmission control ECU assembly
| -
|
3. Reregister all keys (new key ID registration)
- HINT:
- If some keys are not registered during the above steps, they will be disabled because they cannot be registered later.
| PROCEDURE "A"
|
4. Register ECU communication ID
| PROCEDURE "G"
|
Transmission control ECU assembly
| Customer has brought at least 1 key
| 1. Replace transmission control ECU assembly
| -
|
2. Register additional keys as necessary (additional key ID registration)
| PROCEDURE "C"
|
All keys are lost
| 1. Replace transmission control ECU assembly
| -
|
2. Replace certification ECU (smart key ECU assembly)
| -
|
3. Reregister all keys (new key ID registration)
- HINT:
- If some keys are not registered during the above steps, they will be disabled because they cannot be registered later.
| PROCEDURE "A"
|
4. Register ECU communication ID
| PROCEDURE "G"
|
Power management control ECU
| No condition required
| Replace power management control ECU
| -
|
for Canada
Malfunctioning ECU
| Condition
| Procedure
| Reference
|
Certification ECU (Smart key ECU assembly)
| Customer has brought all keys
| 1. Replace certification ECU (smart key ECU assembly)
| -
|
2. Reregister all keys (new key ID registration)
| PROCEDURE "B"
|
Some keys are lost
| Key ID codes can be registered and erased
| 1. Erase key codes (key ID erasure)
| PROCEDURE "D"
|
2. Perform additional key registration procedure (additional key ID registration)
| PROCEDURE "C"
|
3. Replace certification ECU (smart key ECU assembly)
| -
|
4. Reregister all keys (new key ID registration)
- HINT:
- If some keys are not registered during the above steps, they will be disabled because they cannot be registered later.
| PROCEDURE "B"
|
Key ID codes cannot be either registered or erased
| 1. Replace certification ECU (smart key ECU assembly)
| -
|
2. Replace ID code box (immobiliser code ECU)
| -
|
3. Reregister all keys (new key ID registration)
- HINT:
- If some keys are not registered during the above steps, they will be disabled because they cannot be registered later.
| PROCEDURE "A"
|
4. Register ECU communication ID
| PROCEDURE "G"
|
Certification ECU (Smart key ECU assembly)
| All keys are lost
| 1. Replace certification ECU (smart key ECU assembly)
| -
|
2. Replace ID code box (immobiliser code ECU)
| -
|
3. Reregister all keys (new key ID registration)
- HINT:
- If some keys are not registered during the above steps, they will be disabled because they cannot be registered later.
| PROCEDURE "A"
|
4. Register ECU communication ID
| PROCEDURE "G"
|
ID code box (Immobiliser code ECU)
| Customer has brought at least 1 key
| 1. Replace ID code box (immobiliser code ECU)
| -
|
2. Register recognition codes in ECUs (ECU code registration)
| PROCEDURE "F"
|
3. Register ECU communication ID
| PROCEDURE "G"
|
All keys are lost
| 1. Replace ID code box (immobiliser code ECU)
| -
|
2. Replace certification ECU (smart key ECU assembly)
| -
|
3. Reregister all keys (new key ID registration)
- HINT:
- If some keys are not registered during the above steps, they will be disabled because they cannot be registered later.
| PROCEDURE "A"
|
4. Register ECU communication ID
| PROCEDURE "G"
|
Transmission control ECU assembly
| Customer has brought at least 1 key
| 1. Replace transmission control ECU assembly
| -
|
2. Register recognition codes in ECUs (ECU code registration)
| PROCEDURE "F"
|
All keys are lost
| 1. Replace transmission control ECU assembly
| -
|
2. Replace certification ECU (smart key ECU assembly)
| -
|
3. Replace ID code box (immobiliser code ECU)
| -
|
4. Reregister all keys (new key ID registration)
- HINT:
- If some keys are not registered during the above steps, they will be disabled because they cannot be registered later.
| PROCEDURE "A"
|
4. Register ECU communication ID
| PROCEDURE "G"
|
Power management control ECU
| No condition required
| Replace power management control ECU
| -
|