WATER PUMP > REMOVAL |
| 1. REMOVE NO. 1 ENGINE UNDER COVER |
| 2. REMOVE INLET AIR CLEANER ASSEMBLY |
![]() |
Remove the 2 bolts and inlet air cleaner assembly.
| 3. DRAIN COOLANT (for Engine) |
Loosen the radiator drain cock plug and drain the coolant.

| *1 | Reservoir Tank Cap | *2 | Radiator Drain Cock Plug |
| 4. REMOVE ENGINE WATER PUMP ASSEMBLY |
Disconnect the connector from the engine water pump assembly.
![]() |
Remove the 5 bolts and engine water pump assembly from the timing chain cover.
![]() |
Remove the gasket from the engine water pump assembly.