FRONT WIPER MOTOR > INSPECTION |
| 1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY |
![]() |
Check the low speed operation.
Connect a battery positive (+) lead to terminal 1 (+1) and a negative (-) lead to terminal 5 (E), and check that the motor operates at low speed.
Check the high speed operation.
Connect a battery positive (+) lead to terminal 4 (+2) and a negative (-) lead to terminal 5 (E), and check that the motor operates at high speed.
| *1 | Component without harness connected (Windshield Wiper Motor Assembly) |