Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (for Power Seat)

FRONT SEAT ASSEMBLY (for Power Seat) > INSPECTION

for Preparation Click here



1. INSPECT SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY


    B161051E22
  1. Check the operation of the slide motor.

    1. Check if the seat cushion spring moves smoothly when the auxiliary battery is connected to the slide motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Auxiliary battery positive (+) → 2
      Auxiliary battery negative (-) → 1
      Forward
      Auxiliary battery positive (+) → 1
      Auxiliary battery negative (-) → 2
      Backward

      Text in Illustration 
      *a
      Component without harness connected
      (Slide Motor (Separate Type Front Seat Cushion Spring Assembly))
      If the result is not as specified, replace the separate type front seat cushion spring assembly.



    B161051E22
  1. Check the operation of the lifter motor.

    1. Check if the seat cushion spring moves smoothly when the auxiliary battery is connected to the lifter motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Auxiliary battery positive (+) → 2
      Auxiliary battery negative (-) → 1
      Upward
      Auxiliary battery positive (+) → 1
      Auxiliary battery negative (-) → 2
      Downward

      Text in Illustration 
      *a
      Component without harness connected
      (Lifter Motor (Separate Type Front Seat Cushion Spring Assembly))
      If the result is not as specified, replace the separate type front seat cushion spring assembly.



    B161051E22
  1. Check the operation of front vertical motor.

    1. Check if the seat cushion spring moves smoothly when the auxiliary battery is connected to the front vertical motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Auxiliary battery positive (+) → 2
      Auxiliary battery negative (-) → 1
      Upward
      Auxiliary battery positive (+) → 1
      Auxiliary battery negative (-) → 2
      Downward

      Text in Illustration 
      *a
      Component without harness connected
      (Front Vertical Motor (Separate Type Front Seat Cushion Spring Assembly))
      If the result is not as specified, replace the separate type front seat cushion spring assembly.



2. INSPECT SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    B161051E22
  1. Check the operation of the reclining motor.

    1. Check if the seatback moves smoothly when the auxiliary battery is connected to the reclining motor connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Auxiliary battery positive (+) → 2
      Auxiliary battery negative (-) → 1
      Forward
      Auxiliary battery positive (+) → 1
      Auxiliary battery negative (-) → 2
      Rearward

      Text in Illustration 
      *a
      Component without harness connected
      (Reclining Motor (Separate Type Front Seatback Assembly))
      If the result is not as specified, replace the separate type front seatback assembly.



    B161051E22
  1. Check the operation of the lumbar support adjuster assembly.

    1. Check that the seatback moves smoothly when the auxiliary battery is connected to the lumbar support adjuster assembly connector terminals.

      OK:
      Measurement Condition
      Operational Direction
      Auxiliary battery positive (+) → 1
      Auxiliary battery negative (-) → 2
      Seatback moves forward
      Auxiliary battery positive (+) → 2
      Auxiliary battery negative (-) → 1
      Seatback moves backward

      Text in Illustration 
      *a
      Component without harness connected
      (Lumbar Support Adjuster Assembly (Separate Type Front Seatback Assembly))
      If the result is not as specified, replace the separate type front seatback assembly.