Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM

POWER DOOR LOCK CONTROL SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the Techstream to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the Techstream on.

  4. Enter the following menus: Customize Setting.

  5. Select the setting by referring to the table below.

    Door Lock 
    Display
    Default
    Content
    Setting
    Unlock Key Twice
    ON
    Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.
    ON or OFF
    Auto Lock
    ON*1
    OFF*2
    Function that locks all doors when the vehicle speed reaches a certain level.
    ON or OFF
    Auto Lock/Shift
    ON*2
    OFF*1
    Function that locks all doors when the shift lever is moved to select another shift state with park (P) selected, the power switch on (READY) and all doors closed.
    ON or OFF
    Auto Unlock/Shift
    ON
    Function that unlocks all doors when the P position switch (transmission shift main switch) is pushed with a shift state other than park (P) selected and the power switch on (READY).
    ON or OFF
    All Unlock/Open-Close
    OFF
    Function that unlocks the other doors when the driver door is opened within 10 seconds after the power switch is turned off.
    ON or OFF

    1. *1: for Korea
    2. *2: except Korea

    Illuminated Entry 
    Display
    Default
    Content
    Setting
    Lighting Time
    15 s
    Function that changes the lighting time after closing all doors. (It will quickly fade out in case of turning the power switch from off to on (ACC) or (IG).)
    7.5 s, 15 s or 30 s


CUSTOMIZING FUNCTION WITH MULTI-DISPLAY

HINT:
The items in the table below can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current setting before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Customizing with the multi-display (w/ Navigation System (for Navigation Receiver Type) or w/ Audio and Visual System (w/o Daytime Running Light))

    1. Turn the power switch on (IG).

    2. Enter the following menus: SETUP / Vehicle / Vehicle Settings / Door Lock Settings.

    3. Select the setting by referring to the table below.

      Display
      Default
      Content
      Setting
      Relevant ECU
      Unlock on Second Key Turn
      On
      Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.
      On or Off
      Main body ECU (Multiplex network body ECU)
      Auto Lock by Speed
      On*1
      Off*2
      Function that locks all doors when the vehicle speed reaches a certain level.
      On or Off
      Main body ECU (Multiplex network body ECU)
      Auto Lock by Shift from P
      On*2
      Off*1
      Function that locks all doors when the shift lever is moved to select another shift state with park (P) selected, the power switch on (READY) and all doors closed.
      On or Off
      Main body ECU (Multiplex network body ECU)
      Auto Unlock by Shift to P
      On
      Function that unlocks all doors when the P position switch (transmission shift main switch) is pushed with a shift state other than park (P) selected and the power switch on (READY).
      On or Off
      Main body ECU (Multiplex network body ECU)
      Auto Unlock by Driver Door
      Off
      Function that unlocks the other doors when the driver door is opened within 10 seconds after the power switch is turned off.
      On or Off
      Main body ECU (Multiplex network body ECU)

      1. *1: for Korea
      2. *2: except Korea

  2. Customizing with the multi-display (w/ Navigation System (for Radio and Display Type) or w/ Audio and Visual System (w/ Daytime Running Light))

    1. Turn the power switch on (IG).

    2. Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Settings.

    3. Select the setting by referring to the table below.

      Display
      Default
      Content
      Setting
      Relevant ECU
      Speed Sensitive Auto Lock
      Off
      Function that locks all doors when the vehicle speed reaches a certain level.
      On or Off
      Main body ECU (Multiplex network body ECU)
      Shift-Linked Auto Lock
      On
      Function that locks all doors when the shift lever is moved to select another shift state with park (P) selected, the power switch on (READY) and all doors closed.
      On or Off
      Main body ECU (Multiplex network body ECU)
      Shift-Linked Auto Unlock
      On
      Function that unlocks all doors when the P position switch (transmission shift main switch) is pushed with a shift state other than park (P) selected and the power switch on (READY).
      On or Off
      Main body ECU (Multiplex network body ECU)