LIGHTING SYSTEM > Diagnosis Circuit |

| 1.CHECK HARNESS AND CONNECTOR (DLC3 - HEADLIGHT LEVELING ECU) |
Disconnect the A48 headlight leveling ECU assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| A48-15 (PRST) - L61-7 (SIL) | Always | Below 1 Ω |
| A48-15 (PRST) - Body ground | Always | 10 kΩ or higher |
|
| ||||
| OK | ||
| ||