Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SMART KEY SYSTEM (for Start Function)

SMART KEY SYSTEM (for Start Function) > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK POWER SOURCE MODE CHANGE FUNCTION
  1. Check the function of the power switch.

    1. Check that power source mode changes in accordance with the conditions of the shift position and brake pedal.

      Brake Pedal
      Shift Lever
      Power Source Mode Pattern
      Depressed
      P
      When the power switch is pushed once.
      1. off → on (READY)
      Not depressed
      P
      Each time the power switch is pushed.
      1. off → on (ACC) → on (IG) → off
      Except P
      Each time the power switch is pushed.
      1. on (ACC) → on (IG) → off
      -
      P
      When the power switch is pushed in the on (READY) condition.
      1. on (READY) → off
      -
      Except P
      When the power switch is pushed in the on (READY) condition.
      1. on (READY) → off

  1. Check that the power source mode changes without pressing the power switch.

    1. With power source mode on (ACC) or on (IG) and with park (P) selected, wait for at least 1 hour. Check that the power source mode changes from on (ACC) or on (IG) to off automatically.



2. CHECK INDICATOR CONDITION


B138023E01
  1. Check the indicator light on the power switch.

    1. Check that the power switch indicator turns on and changes color according to the table below.

      Power Source Mode/Condition
      Indicator Light Condition
      Brake Pedal Released
      Brake Pedal Depressed, Park (P) selected
      off
      off
      Turns on (Green)
      on (ACC, IG)
      Turns on (Amber)
      Turns on (Green)
      on (READY)
      off
      off
      System malfunction
      Flashes (Amber) for 15 sec.
      Flashes (Amber) for 15 sec.