Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › OCCUPANT CLASSIFICATION SYSTEM

OCCUPANT CLASSIFICATION SYSTEM > PRECAUTION

for Preparation Click here



1.GENERAL PRECAUTION
  1. Perform zero point calibration and sensitivity check if any of the following conditions occur:

    1. The occupant classification ECU is replaced.
    2. Accessories (seatback tray and seat cover, etc.) are installed.
    3. The front passenger seat is removed from the vehicle.
    4. The passenger airbag ON/OFF indicator ("OFF") comes on when the front passenger seat is not occupied.
    5. The vehicle is brought to the workshop for repair due to an accident or a collision.