Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › OCCUPANT CLASSIFICATION SYSTEM

OCCUPANT CLASSIFICATION SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


HINT:
  1. Use the following procedure to troubleshooting the occupant classification system.
  2. *: Use the Techstream.



1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS
    1. Confirm problem symptoms (Click here).


    NEXT


    3.PASSENGER AIRBAG ON/OFF INDICATOR CHECK

      NEXT


      4.DTC CHECK (Present and History DTCs)
      1. Check for DTCs.

        Result:
        Result
        Proceed to
        DTC is output.
        A
        DTC is not output.
        B



      B.
      GO TO PROBLEM SYMPTOMS TABLE
      A


      5.DTC CHART

        NEXT


        6.CIRCUIT INSPECTION*

          NEXT


          7.REPAIR

            NEXT


            8.CLEAR DTCS (Present and History DTCs)*
            1. Clear the DTCs.


            NEXT


            9.DTC CHECK (Present and History DTCs)*
            1. Check for DTCs.

              Result:
              Result
              Proceed to
              DTC is not output.
              A
              DTC is output.
              B



            B.
            GO TO DIAGNOSTIC TROUBLE CODE CHART (Click here)
            A


            10.SYMPTOM SIMULATION
            1. Check the passenger airbag ON/OFF indicator condition.

              Result:
              Result
              Proceed to
              Passenger airbag ON/OFF indicator operates normally.
              A
              Passenger airbag ON/OFF indicator ("OFF") and SRS warning light come on.
              B



            B.
            GO TO DIAGNOSTIC TROUBLE CODE CHART (Click here)
            A


            11.CONFIRMATION TEST

              NEXT

              END