Terminal No. (Symbol)
| Wiring Color
| Terminal Description
| Condition
| Specification
|
W3-1 (+B) - W3-3 (GND)
| W - W-B
| Auxiliary battery
| Always
| 11 to 14 V
|
W3-2 (DIA) - W3-3 (GND)
| GR - W-B
| Diagnosis (DLC3)
| Power switch on (IG)
| Pulse generation
|
W3-3 (GND) - Body ground
| W-B - Body ground
| Ground
| Always
| Below 1 V
|
W3-4 (FSR-) - W3-3 (GND)
| LG - W-B
| Center airbag sensor assembly communication line
| Always
| Below 1 V
|
W3-5 (BGND) - W3-3 (GND)
| P - W-B
| Passenger side buckle switch ground line
| Always
| Below 1 V
|
W3-7 (IG) - W3-3 (GND)
| B - W-B
| Power source
| Power switch on (IG)
| 11 to 14 V
|
W3-8 (FSR+) - W3-4 (FSR-)
| L - LG
| Center airbag sensor assembly communication line
| Power switch on (IG)
| Pulse generation
|
W3-9 (BSW) - W3-5 (BGND)
| G - P
| Passenger side buckle switch line
| Always
| Pulse generation
|
W2-1 (SGD1) - W3-3 (GND)
| G - W-B
| Front occupant classification sensor LH ground line
| Always
| Below 1 V
|
W2-2 (SGD2) - W3-3 (GND)
| LG - W-B
| Front occupant classification sensor RH ground line
| Always
| Below 1 V
|
W2-3 (SGD3) - W3-3 (GND)
| W - W-B
| Rear occupant classification sensor LH ground line
| Always
| Below 1 V
|
W2-4 (SGD4) - W3-3 (GND)
| BR - W-B
| Rear occupant classification sensor RH ground line
| Always
| Below 1 V
|
W2-5 (SVC3) - W2-3 (SGD3)
| GR - W
| Rear occupant classification sensor LH power supply line
| Power switch on (IG)
| 4.9 to 5.1 V
|
W2-6 (SVC4) - W2-4 (SGD4)
| V - BR
| Rear occupant classification sensor RH power supply line
| Power switch on (IG)
| 4.9 to 5.1 V
|
W2-7 (SIG1) - W2-1 (SGD1)
| P - G
| Front occupant classification sensor LH signal line
| Power switch on (IG), a load applied to front occupant classification sensor LH
| 0 to 5.1 V
|
W2-8 (SIG2) - W2-2 (SGD2)
| L - LG
| Front occupant classification sensor RH signal line
| Power switch on (IG), a load applied to front occupant classification sensor RH
| 0 to 5.1 V
|
W2-9 (SIG3) - W2-3 (SGD3)
| SB - W
| Rear occupant classification sensor LH signal line
| Power switch on (IG), a load applied to rear occupant classification sensor LH
| 0 to 5.1 V
|
W2-10 (SIG4) - W2-4 (SGD4)
| B - BR
| Rear occupant classification sensor RH signal line
| Power switch on (IG), a load applied to rear occupant classification sensor RH
| 0 to 5.1 V
|
W2-11 (SVC1) - W2-1 (SGD1)
| R - G
| Front occupant classification sensor LH power supply line
| Power switch on (IG)
| 4.9 to 5.1 V
|
W2-12 (SVC2) - W2-2 (SGD2)
| W - LG
| Front occupant classification sensor RH power supply line
| Power switch on (IG)
| 4.9 to 5.1 V
|