Function
| Outline
|
Manual lock and unlock function
| This function can lock or unlock all doors by the door control switch operation.
|
Key-linked lock and unlock function
| This function, which is linked with the mechanical key cylinder, can lock or unlock all doors when a lock or unlock operation is effected.
|
Manual unlock prohibition function
| When the condition below is met, unlocking the vehicle using the door control switch will be prohibited.
- The doors are locked using a mechanical key, door control transmitter or entry lock operation with all doors closed.
|
Key lock-in prevention function
| When the key is in the vehicle, performing the door lock operation will not lock the door.
|
Key-linked 2-step unlock function
| Unlocks only the driver door by turning the key cylinder once and unlocks the other doors by turning it twice.
|
Shift-linked automatic door lock function*2
| When the conditions listed below are met consecutively, this function causes all doors to be automatically locked:
- All doors are closed.
- The hybrid vehicle control system is started.
- The shift lever is moved to any position.
|
Shift-linked automatic door unlock function
| When the conditions listed below are met consecutively, this function causes all doors to be automatically unlocked:
- The power switch is on (IG).
- Push the P position switch.
|
Speed-sensitive automatic door lock function*3
| When the conditions listed below are met consecutively, this function causes all doors to be automatically locked:
- All doors are closed.
- Any of the doors is unlocked.
- Vehicle speed is higher than approximately 20 km/h (12 mph).
|
Opening driver door-linked automatic door unlock*4
| All doors are unlocked automatically when the driver door is opened within 10 seconds after the power switch is turned from on (IG) to off.
|