Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM

METER / GAUGE SYSTEM > TERMINALS OF ECU

for Preparation Click here



COMBINATION METER ASSEMBLY

E188249E05

  1. Measure the voltage and resistance according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    L27-2 (TC O) - Body ground
    G - Body ground
    Trip switch signal (Unit change switch)
    Unit change switch not pressed
    11 to 14 V
    Unit change switch pressed
    Below 1 V
    L27-3 (TIRE)*1 - Body ground
    G - Body ground
    Tire pressure warning light signal
    Power switch on (IG), tire pressure warning light off
    3.2 V or higher
    Power switch on (IG), tire pressure warning light blinks
    Below 3.2 V
    L27-5 (S) - Body ground
    R - Body ground
    Oil pressure switch signal
    Power switch on (IG), oil pressure warning display off
    Below 1 V
    Power switch on (IG), oil pressure warning display comes on
    11 to 14 V
    L27-6 (LVWG) - Body ground
    L - Body ground
    Headlight leveling indicator light signal
    Power switch on (IG), headlight leveling indicator light off
    11 to 14 V
    Power switch on (IG), headlight leveling indicator light blinks
    Below 1 V ←→ 11 to 14 V
    L27-7 (+S) - Body ground
    V - Body ground
    Speed signal for other systems (Output)
    Power switch on (IG), front wheel turns slowly
    Pulse generation
    (See waveform 1)
    L27-8 (SI) - Body ground
    V - Body ground
    Speed signal (Input)
    Power switch on (IG), front wheel turns slowly
    Pulse generation
    (See waveform 1)
    L27-9 (E2) - Body ground
    G - Body ground
    Ground (Water temperature sensor ground)
    Always
    Below 1 Ω
    L27-10 (CANH) - Body ground
    P - Body ground
    CAN communication signal
    Power switch off
    200 Ω or higher
    L27-11 (CANL) - Body ground
    W - Body ground
    CAN communication signal
    Power switch off
    200 Ω or higher
    L27-12 (HOUR) - Body ground
    B - Body ground
    Trip switch signal (Hour adjust switch)
    Hour adjust switch not pressed
    11 to 14 V
    Hour adjust switch pressed
    Below 1 V
    L27-13 (MIN) - Body ground
    B - Body ground
    Trip switch signal (Minute adjust switch)
    Minute adjust switch not pressed
    11 to 14 V
    Minute adjust switch pressed
    Below 1 V
    L27-14 (L) - Body ground
    B - Body ground
    Fuel level signal
    Power switch on (IG), fuel level warning light off
    Below 1 V
    Power switch on (IG), fuel level warning light on
    3 to 7 V
    L27-15 (ES2) - Body ground
    W - Body ground
    Ground
    Always
    Below 1 Ω
    L27-16 (TWS3) - Body ground
    B - Body ground
    Water temperature sensor signal
    Power switch on (IG), coolant temperature below 113°C (235°F)
    0.2 to 4.8 V
    Power switch on (IG), coolant temperature below 120°C (248°F) or more
    Below 0.15 V
    L27-17 (RST) - Body ground
    R - Body ground
    Trip switch signal (Set switch)
    Set switch not pressed
    11 to 14 V
    Set switch pressed
    Below 1 V
    L27-18 (B) - Body ground
    R - Body ground
    Battery
    Power switch off
    11 to 14 V
    L27-19 (IG+) - Body ground
    L - Body ground
    Power switch signal
    Power switch off
    Below 1 V
    Power switch on (IG)
    11 to 14 V
    L27-20 (IG2) - Body ground
    G - Body ground
    Power switch signal
    Power switch off
    Below 1 V
    Power switch on (IG)
    11 to 14 V
    L27-21 (PBLT) - Body ground
    Y - Body ground
    Front passenger side seat belt warning light signal
    Power switch on (IG), front passenger side seat belt warning light off
    11 to 14 V
    Power switch on (IG), front passenger side seat belt warning light blinks
    Below 1 V ←→ 11 to 14 V
    L27-22 (LP) - Body ground
    B - Body ground
    Security indicator light signal
    Power switch on (IG), security indicator light off
    Below 2 V
    Security indicator light blinks
    Pulse generation
    L27-25 (EFI) - Body ground
    LG - Body ground
    MIL (Check engine warning light) signal
    Power switch on (IG), MIL (Check engine warning light) off
    11 to 14 V
    Power switch on (IG), MIL (Check engine warning light) comes on
    Below 1 V
    L27-26 (B) - Body ground
    Y - Body ground
    Turn LH indicator light signal
    Power switch on (IG), turn LH indicator light off
    11 to 14 V
    Power switch on (IG), turn LH indicator light blinks
    Below 1 V ←→ 11 to 14 V
    L27-27 (B) - Body ground
    G - Body ground
    Turn RH indicator light signal
    Power switch on (IG), turn RH indicator light off
    11 to 14 V
    Power switch on (IG), turn RH indicator light blinks
    Below 1 V ←→ 11 to 14 V
    L27-28 (AU1)*4 - Body ground
    G - Body ground
    Steering pad switch assembly signal (DISP)
    Power switch on (IG), DISP switch not pressed
    11 to 14 V
    Power switch on (IG), DISP switch pressed
    Below 1 V
    L27-29 (STRG)*5 - Body ground
    G - Body ground
    Multi-information switch (steering pad switch assembly) signal
    Always
    Pulse generation
    L27-30 (ES) - Body ground
    BR - Body ground
    Ground (Signal ground)
    Always
    Below 1 Ω
    L27-31 (AU2)*4 - Body ground
    B - Body ground
    Steering pad switch assembly power supply
    Power switch off
    Below 1 V
    Power switch on (IG)
    11 to 14 V
    L27-35 (TC) - Body ground
    G - Body ground
    Light control rheostat signal (Tail cancel switch)
    Power switch on (IG), light control rheostat position except below
    1 to 6 V
    Power switch on (IG), turn the light control rheostat fully upwards
    Below 1 V
    L27-36 (SW1) - Body ground
    B - Body ground
    Light control rheostat signal
    Always
    4 to 6 V
    L27-37 (SW2) - Body ground
    B - Body ground
    Light control rheostat signal
    Power switch on (IG), light control rheostat except on tail cancel position
    1 to 6 V
    (Gradually change)
    L27-38 (SW3) - Body ground
    R - Body ground
    Light control rheostat signal (Rheostat ground)
    Always
    Below 1 Ω
    L27-39 (RL)*2 - Body ground
    L - Body ground
    Light control rheostat LED illumination signal
    Power switch on (IG), light control rheostat LED illumination off
    Below 1 V
    Power switch on (IG), light control rheostat LED illumination illuminates
    4 to 6 V
    L27-40 (RV)*2 - Body ground
    W - Body ground
    Light control rheostat illumination signal
    Power switch on (IG), light control rheostat illumination off
    Below 1 V
    Power switch on (IG), light control rheostat illumination illuminates
    4 to 6 V
    L136-1 (12V)*3 - Body ground
    B - Body ground
    Power switch signal
    Power switch off
    11 to 14 V
    L136-4 (GND)*3 - Body ground
    W - Body ground
    Ground
    Always
    Below 1 Ω
    L136-5 (BKR)*3 - Body ground
    P - Body ground
    Headup display illumination signal
    Power switch on (IG)
    Pulse generation
    L136-6 (LAT)*3 - Body ground
    R - Body ground
    Headup display dot illumination timing signal
    Power switch on (IG)
    Pulse generation
    L136-7 (CLKH)*3 - Body ground
    R - Body ground
    Clock signal
    Always
    Pulse generation
    L136-8 (CLKL)*3 - Body ground
    G - Body ground
    Clock signal
    Always
    Pulse generation
    L136-9 (SIH)*3 - Body ground
    G - Body ground
    Headup display dot signal
    Power switch on (IG)
    Pulse generation
    L136-10 (SIL)*3 - Body ground
    R - Body ground
    Headup display dot signal
    Power switch on (IG)
    Pulse generation
    L136-11 (WE)*3 - Body ground
    L - Body ground
    Headup display dot illumination signal
    Power switch on (IG), headup display illuminated
    Pulse generation
    L136-14 (STP1)*3 - Body ground
    V - Body ground
    Stepper motor signal
    Power switch on (IG)
    Pulse generation
    L136-15 (STP2)*3 - Body ground
    LG - Body ground
    Stepper motor signal
    Power switch on (IG)
    Pulse generation
    L136-16 (STP3)*3 - Body ground
    B - Body ground
    Stepper motor signal
    Power switch on (IG)
    Pulse generation
    L136-17 (STP4)*3 - Body ground
    W - Body ground
    Stepper motor signal
    Power switch on (IG)
    Pulse generation
    L137-1 (NVSW)*3 - L137-2 (E)
    Y - BE
    Navigation system display select switch signal
    Turn the power switch on (IG), navigation system display select switch not pressed
    Below 1 V
    Turn the power switch on (IG), navigation system display select switch pressed
    11 to 14 V
    L137-2 (E) - Body ground
    BE - Body ground
    Ground
    Always
    Below 1 Ω
    L137-3 (HUDI)*3 - Body ground
    W - Body ground
    Headup display indicator light signal
    Turn the power switch on (IG), headup display indicator light goes off
    Below 1 V
    Turn the power switch on (IG), headup display indicator light comes on
    11 to 14 V
    L137-4 (HUDD)*3 - L137-2 (E)
    R - BE
    Headup display position down switch signal
    Turn the power switch on (IG), headup display position down switch not pressed
    Below 1 V
    Turn the power switch on (IG), headup display position down switch pressed
    11 to 14 V
    L137-7 (HUDU)*3 - L137-2 (E)
    P - BE
    Headup display position up switch signal
    Turn the power switch on (IG), headup display position down switch not pressed
    Below 1 V
    Turn the power switch on (IG), headup display position down switch pressed
    11 to 14 V
    L137-8 (HUDO)*3 - L137-2 (E)
    B - BE
    Headup display mode select switch signal
    Turn the power switch on (IG), headup display mode select switch not pressed
    Below 1 V
    Turn the power switch on (IG), headup display mode select switch pressed
    11 to 14 V
    L137-9 (IIND)*3 - Body ground
    BE - Body ground
    Navigation system indicator light signal
    Turn the power switch on (IG), navigation system indicator light goes off
    Below 1 V
    Turn the power switch on (IG), navigation system indicator light comes on
    11 to 14 V

    1. *1: w/ Tire Pressure Warning System
    2. *2: except Korea, Mexico
    3. *3: w/ Headup Display
    4. *4: w/o Touch Tracer Display
    5. *5: w/ Touch Tracer Display



  2. I043789E03
  3. Waveform 1 (Reference): Using an oscilloscope:
    Item
    Condition
    Tool setting
    5 V/DIV., 20 ms./DIV.
    Vehicle condition
    Driving at approx. 20 km/h (12 mph)

    HINT:
    When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width indicated by (A) in the illustration narrows.


COMBINATION METER ASSEMBLY INNER CIRCUIT

E237319E02


E237302E02


E237303E02


Terminal No. (Symbol)
Wire Harness Side
L27
1
-
2 (TC O)
Trip Switch
3 (TIRE)
Tire Pressure Warning ECU*1
4
-
5 (S)
Oil Pressure Switch
6 (LVWG)
Headlight Leveling ECU Assembly
7 (+S)
Each part that uses the speed signal
8 (SI)
Skid Control ECU
9 (E2)
Ground (Water Temperature Sensor Ground)
10 (CANH)
CAN Communication Line
11 (CANL)
CAN Communication Line
12 (HOUR)
Trip Switch
13 (MIN)
Trip Switch
14 (L)
Fuel Sender Gauge Assembly
15 (ES2)
Fuel Sender Gauge Assembly
16 (TWS3)
Water Temperature Sensor
17 (RST)
Trip Switch
18 (B)
ECU-B Fuse
19 (IG+)
GAUGE Fuse
20 (IG2)
MET Fuse
21 (PBLT)
Telltale Light Assembly
22 (LP)
Certification ECU (Smart Key ECU Assembly)
23
-
24
-
25 (EFI)
ECM
26 (B)
Turn Signal Flasher
27 (B)
Turn Signal Flasher
28 (AU1)
Multi-information Switch (Steering Pad Switch Assembly)*4
29 (STRG)
Multi-information Switch (Steering Pad Switch Assembly)*5
30 (ES)
Ground
31 (AU2)
Multi-information Switch (Steering Pad Switch Assembly)*4
32
-
33
-
34
-
35 (TC)
Light Control Rheostat
36 (SW1)
Light Control Rheostat
37 (SW2)
Light Control Rheostat
38 (SW3)
Light Control Rheostat
39 (RL)
Each part that uses the illumination signal*2
40 (RV)
PANEL Fuse*2

Terminal No. (Symbol)
Wire Harness Side
L136*3
1 (12V)
Headup Display
2
-
3
-
4 (GND)
Ground
5 (BKR)
Headup Display (Combination Meter Mirror ECU)
6 (LAT)
Headup Display (Combination Meter Mirror ECU)
7 (CLKH)
Headup Display (Combination Meter Mirror ECU)
8 (CLKL)
Headup Display (Combination Meter Mirror ECU)
9 (SIH)
Headup Display (Combination Meter Mirror ECU)
10 (SIL)
Headup Display (Combination Meter Mirror ECU)
11 (WE)
Headup Display (Combination Meter Mirror ECU)
12
-
13
-
14 (STP1)
Headup Display (Combination Meter Mirror ECU)
15 (STP2)
Headup Display (Combination Meter Mirror ECU)
16 (STP3)
Headup Display (Combination Meter Mirror ECU)
17 (STP4)
Headup Display (Combination Meter Mirror ECU)
18
-
19
-
20
-
21
-
22
-
23
-
24
-
L137*3
1 (NVSW)
Trip Switch
2 (E)
Trip Switch
3 (HUDI)
Trip Switch
4 (HUDD)
Trip Switch
5
-
6
-
7 (HUDU)
Trip Switch
8 (HUDO)
Trip Switch
9 (IIND)
Trip Switch
10
-
11
-
12
-
13
-
14
-
15
-
16
-
  1. *1: w/ Tire Pressure Warning System
  2. *2: except Korea, Mexico
  3. *3: w/ Headup Display
  4. *4 w/o Touch Tracer Display
  5. *5 w/ Touch Tracer Display