Home › Vehicle Interior › MIRROR (INT) › INNER REAR VIEW MIRROR

INNER REAR VIEW MIRROR > INSPECTION

for Preparation Click here



1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/ GARAGE DOOR OPENER SYSTEM)


  1. Inspect the operation of the electrochromic inner mirror.


    B309284E01


    Text in Illustration 
    *1
    Black Colored Tape
    *2
    Forward Sensor
    *3
    Bright
    *4
    Dark

    1. Connect the positive (+) lead from a battery to terminal 1 and the negative (-) lead to terminal 2.

    2. Press the EC ON switch.

    3. Attach black colored tape to the forward sensor to prevent it from sensing.

    4. Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.

      Standard:
      Mirror surface changes from bright to dark.

      If the result is not as specified, replace the mirror assembly.



2. INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/o GARAGE DOOR OPENER)


  1. Inspect the operation of the electrochromic inner mirror.


    B231201E01


    Text in Illustration 
    *1
    Black Colored Tape
    *2
    Forward Sensor
    *3
    Bright
    *4
    Dark

    1. Connect the positive (+) lead from a battery to terminal 4 and the negative (-) lead to terminal 1.

    2. Press the AUTO switch.

    3. Attach black colored tape to the forward sensor to prevent it from sensing.

    4. Light up the mirror with an electric light, and check that the mirror surface changes from bright to dark.

      Standard:
      Mirror surface changes from bright to dark.

      If the result is not as specified, replace the mirror assembly.