Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › ACCELERATOR PEDAL SENSOR

ACCELERATOR PEDAL SENSOR > REMOVAL

for Preparation Click here



1. REMOVE ACCELERATOR PEDAL ASSEMBLY

NOTICE:
  1. Avoid physical shock to the accelerator pedal assembly.
  2. Do not disassemble the accelerator pedal assembly.
  3. This accelerator pedal assembly does not require lubrication.
  4. Do not apply oil or other lubrication to the accelerator pedal assembly. If applied, the accelerator pedal assembly must be replaced.



    A220945
  1. Disconnect the accelerator pedal assembly connector.

  1. Remove the 2 bolts and accelerator pedal assembly.