Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM (for Brush Type Motor)

POWER STEERING SYSTEM (for Brush Type Motor) > SYSTEM DESCRIPTION

for Preparation Click here



DESCRIPTION
The power steering system generates torque through the operation of the motor and the reduction gear installed on the column shaft in order to assist steering effort.
The power steering ECU assembly determines the direction and the amount of assisting power in accordance with the vehicle speed signals and signals from the torque sensor built into the electric power steering column sub-assembly. As a result, steering effort is controlled to be light during low speed driving and moderately high during high speed driving.
  1. Power steering ECU assembly:
    The power steering ECU assembly calculates assisting power based on steering torque signals from the torque sensor and vehicle speed signals from the skid control ECU.

  2. Torque sensor:
    The torque sensor detects the steering effort generated when the steering wheel is turned and converts it to an electrical signal.

  3. Power steering motor assembly:
    The power steering motor assembly is activated by the current from the power steering ECU assembly and generates torque to assist the steering effort.